Break out common pieces from TeleGPS and AltusMetrum

This creates shared files for portions of the TeleGPS and AltusMetrum
manual to avoid duplicating text between the two.

Signed-off-by: Keith Packard <keithp@keithp.com>

1 files changed, 105 insertions, 0 deletions

diff --git a/doc/config-ui.inc b/doc/config-ui.inc
new file mode 100644
index 00000000..c7e7f1ac
--- /dev/null
+++ b/doc/config-ui.inc
@@ -0,0 +1,105 @@
+==== Voice Settings
+
+	{application} provides voice announcements during
+	flight so that you can keep your eyes on the
+	sky and still get information about the
+	current flight status. However, sometimes you
+	don't want to hear them.
+
+	Enable::
+	Turns all voice announcements on and off
+
+	Test Voice::
+	Plays a short message allowing you to verify
+	that the audio system is working and the volume settings
+	are reasonable
+
+==== Log Directory
+
+	{application} logs all telemetry data and saves all
+	TeleMetrum flash data to this directory. This
+	directory is also used as the staring point
+	when selecting data files for display or
+	export.
+
+	Click on the directory name to bring up a
+	directory choosing dialog, select a new
+	directory and click 'Select Directory' to
+	change where {application} reads and writes data
+	files.
+
+==== Callsign
+
+	This value is transmitted in each command
+	packet sent from TeleDongle and received from
+	an altimeter.  It is not used in telemetry
+	mode, as the callsign configured in the
+	altimeter board is included in all telemetry
+	packets.  Configure this with the {application}
+	operators call sign as needed to comply with
+	your local radio regulations.
+
+	Note that to successfully command a flight
+	computer over the radio (to configure the
+	altimeter, monitor idle, or fire pyro
+	charges), the callsign configured here must
+	exactly match the callsign configured in the
+	flight computer.  This matching is case
+	sensitive.
+
+==== Imperial Units
+
+	This switches between metric units (meters)
+	and imperial units (feet and miles). This
+	affects the display of values use during
+	flight monitoring, configuration, data
+	graphing and all of the voice
+	announcements. It does not change the units
+	used when exporting to CSV files, those are
+	always produced in metric units.
+
+==== Serial Debug
+
+	This causes all communication with a connected
+	device to be dumped to the console from which
+	{application} was started. If you've started it from
+	an icon or menu entry, the output will simply
+	be discarded. This mode can be useful to debug
+	various serial communication issues.
+
+==== Font size
+
+	Selects the set of fonts used in the flight
+	monitor window. Choose between the small,
+	medium and large sets.
+
+==== Look & feel
+
+	Switches between the available Java user
+	interface appearances. The default selection
+	is supposed to match the native window system
+	appearance for the target platform.
+	
+==== Menu position
+
+	Selects the initial position for the main
+	{application} window that includes all of the
+	command buttons.
+
+==== Map Cache Size
+
+	Sets the number of map 'tiles' kept in memory
+	while the application is running. More tiles
+	consume more memory, but will make panning
+	around the map faster.
+
+==== Manage Frequencies
+
+	This brings up a dialog where you can
+	configure the set of frequencies shown in the
+	various frequency menus. You can add as many
+	as you like, or even reconfigure the default
+	set. Changing this list does not affect the
+	frequency settings of any devices, it only
+	changes the set of frequencies shown in the
+	menus.