update turnon_telemetrum to v1.2, add more turnon scripts

3 files changed, 99 insertions, 3 deletions

diff --git a/ao-bringup/turnon_telemetrum b/ao-bringup/turnon_telemetrum
index 47835c58..faf49d43 100755
--- a/ao-bringup/turnon_telemetrum
+++ b/ao-bringup/turnon_telemetrum
@@ -18,11 +18,11 @@ else
 	exit 1
 fi
 
-echo "TeleMetrum v1.1 Turn-On and Calibration Program"
+echo "TeleMetrum v1.2 Turn-On and Calibration Program"
 echo "Copyright 2010 by Bdale Garbee.  Released under GPL v2"
 echo
 echo "Expectations:"
-echo "\tTeleMetrum v1.1 powered from USB"
+echo "\tTeleMetrum v1.2 powered from USB"
 echo "\t\twith TeleDongle (on /dev/ttyACM0) cabled to debug header"
 echo "\t\twith coax from UHF to frequency counter"
 echo
@@ -43,7 +43,7 @@ CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
 
 echo "Programming flash with cal value " $CAL_VALUE
 $AOLOAD --device 100 --cal $CAL_VALUE \
-	/usr/share/altos/stable/telemetrum-v1.1*.ihx $SERIAL
+	/usr/share/altos/stable/telemetrum-v1.2*.ihx $SERIAL
 
 echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
 echo "Unplug and replug USB, cu to the board, confirm freq and record power"
diff --git a/ao-bringup/turnon_teleshield b/ao-bringup/turnon_teleshield
new file mode 100755
index 00000000..e9f651fb
--- /dev/null
+++ b/ao-bringup/turnon_teleshield
@@ -0,0 +1,48 @@
+#!/bin/sh
+
+if [ -x ../ao-tools/ao-load/ao-load ]; then
+	AOLOAD=../ao-tools/ao-load/ao-load
+elif [ -x /usr/bin/ao-load ]; then
+	AOLOAD=/usr/bin/ao-load
+else
+	echo "Can't find ao-load!  Aborting."
+	exit 1
+fi
+
+if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
+	RAWLOAD=../ao-tools/ao-rawload/ao-rawload
+elif [ -x /usr/bin/ao-rawload ]; then
+	RAWLOAD=/usr/bin/ao-rawload
+else
+	echo "Can't find ao-rawload!  Aborting."
+	exit 1
+fi
+
+echo "TeleShield v0.1 Turn-On and Calibration Program"
+echo "Copyright 2012 by Bdale Garbee.  Released under GPL v2"
+echo
+echo "Expectations:"
+echo "\tTeleShield v0.1 powered from USB"
+echo "\t\twith TeleDongle (on /dev/ttyACM0) cabled to debug header"
+echo "\t\twith coax from SMA to frequency counter"
+echo
+echo -n "TeleShield serial number: "
+read SERIAL
+
+echo $RAWLOAD
+
+$RAWLOAD -D 100 -r ao_led_blink.ihx
+echo "LEDs should be blinking"
+sleep 5
+
+$RAWLOAD -D 100 -r ao_radio_xmit.ihx
+echo -n "Generating RF carrier.  Please enter measured frequency: "
+read FREQ
+
+CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+
+echo "Programming flash with cal value " $CAL_VALUE
+$AOLOAD -D 100 --cal $CAL_VALUE /home/bdale/debian/altos/src/teleshield-v0.1/*.ihx $SERIAL
+
+echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
+echo "Unplug and replug USB, cu to the board, confirm freq and record power"
diff --git a/ao-bringup/turnon_teleterra b/ao-bringup/turnon_teleterra
new file mode 100755
index 00000000..b63da2ff
--- /dev/null
+++ b/ao-bringup/turnon_teleterra
@@ -0,0 +1,48 @@
+#!/bin/sh
+
+if [ -x ../ao-tools/ao-load/ao-load ]; then
+	AOLOAD=../ao-tools/ao-load/ao-load
+elif [ -x /usr/bin/ao-load ]; then
+	AOLOAD=/usr/bin/ao-load
+else
+	echo "Can't find ao-load!  Aborting."
+	exit 1
+fi
+
+if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
+	RAWLOAD=../ao-tools/ao-rawload/ao-rawload
+elif [ -x /usr/bin/ao-rawload ]; then
+	RAWLOAD=/usr/bin/ao-rawload
+else
+	echo "Can't find ao-rawload!  Aborting."
+	exit 1
+fi
+
+echo "TeleTerra v0.2 Turn-On and Calibration Program"
+echo "Copyright 2012 by Bdale Garbee.  Released under GPL v2"
+echo
+echo "Expectations:"
+echo "\tTeleTerra v0.2 powered from USB"
+echo "\t\twith TeleDongle (on /dev/ttyACM0) cabled to debug header"
+echo "\t\twith coax from SMA to frequency counter"
+echo
+echo -n "TeleTerra serial number: "
+read SERIAL
+
+echo $RAWLOAD
+
+$RAWLOAD -D 100 -r ao_led_blink.ihx
+echo "LEDs should be blinking"
+sleep 5
+
+$RAWLOAD -D 100 -r ao_radio_xmit.ihx
+echo -n "Generating RF carrier.  Please enter measured frequency: "
+read FREQ
+
+CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+
+echo "Programming flash with cal value " $CAL_VALUE
+$AOLOAD -D 100 --cal $CAL_VALUE /home/bdale/debian/altos/src/teleterra-v0.2/*.ihx $SERIAL
+
+echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
+echo "Unplug and replug USB, cu to the board, confirm freq and record power"