doc: Add version 1.2 release notes

Signed-off-by: Keith Packard <keithp@keithp.com>

3 files changed, 97 insertions, 1 deletions

diff --git a/doc/Makefile b/doc/Makefile
index 59fd4ebb..7c4da29e 100644
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -8,8 +8,9 @@ RELNOTES=\
 	release-notes-0.9.html \
 	release-notes-0.9.2.html \
 	release-notes-1.0.1.html \
+	release-notes-1.1.html \
 	release-notes-1.1.1.html \
-	release-notes-1.1.html
+	release-notes-1.2.html
 
 RELNOTES_XSL=$(RELNOTES:.html=.xsl)
 HTML=altusmetrum.html altos.html telemetry.html companion.html micropeak.html $(RELNOTES)
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index e696da79..c5c08d4e 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -2679,6 +2679,7 @@ NAR #88757, TRA #12200
   <appendix
       xmlns:xi="http://www.w3.org/2001/XInclude">
     <title>Release Notes</title>
+    <simplesect><title>Version 1.2</title><xi:include	href="release-notes-1.2.xsl"  xpointer="xpointer(/article/*)"/></simplesect>
     <simplesect><title>Version 1.1.1</title><xi:include	href="release-notes-1.1.1.xsl"  xpointer="xpointer(/article/*)"/></simplesect>
     <simplesect><title>Version 1.1</title><xi:include	href="release-notes-1.1.xsl"  xpointer="xpointer(/article/*)"/></simplesect>
     <simplesect><title>Version 1.0.1</title><xi:include	href="release-notes-1.0.1.xsl"  xpointer="xpointer(/article/*)"/></simplesect>
diff --git a/doc/release-notes-1.2.xsl b/doc/release-notes-1.2.xsl
new file mode 100644
index 00000000..610fa1a2
--- /dev/null
+++ b/doc/release-notes-1.2.xsl
@@ -0,0 +1,94 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+"/usr/share/xml/docbook/schema/dtd/4.5/docbookx.dtd">
+
+<article>
+  <para>
+    Version 1.2 is a minor release. It provides a few new features in AltosUI
+    and the AltOS firmware and fixes bugs.
+  </para>
+  <para>
+    AltOS Firmware Changes
+    <itemizedlist>
+      <listitem>
+	In TeleMini recovery mode (when booted with the outer two
+	debug pins connected together), the radio parameters are also
+	set back to defaults (434.550MHz, N0CALL, factory radio cal).
+      </listitem>
+      <listitem>
+	Add support for reflashing the SkyTraq GPS chips. This
+	requires special host-side code which currently only exists
+	for Linux.
+      </listitem>
+      <listitem>
+	Add MicroPeak support. This includes support for the ATtiny85
+	processor and adaptations to the core code to allow for
+	devices too small to run the multi-tasking scheduler.
+      </listitem>
+      <listitem>
+	Correct Kalman filter model error covariance matrix. The
+	values used previously assumed continuous measurements instead
+	of discrete measurements.
+      </listitem>
+    </itemizedlist>
+  </para>
+  <para>
+    AltosUI Changes
+    <itemizedlist>
+      <listitem>
+	Handle missing GPS lock in 'Descent' tab. Previously, if the
+	GPS position of the pad was unknown, an exception would be
+	raised, breaking the Descent tab contents.
+      </listitem>
+      <listitem>
+	Add preliminary MegaMetrum support, including configuration,
+	data download and analysis.
+      </listitem>
+      <listitem>
+	Improve the graph, adding tool-tips to show values near the
+	cursor and making the displayed set of values configurable,
+	adding all of the flight data as options while leaving the
+	default settings alone so that the graph starts by showing
+	height, speed and acceleration.
+      </listitem>
+      <listitem>
+	Make the initial position of the AltosUI top level window
+	configurable. Along with this change, the other windows will
+	pop up at 'sensible' places now, instead of on top of one
+	another.
+      </listitem>
+      <listitem>
+	Add callsign to Monitor idle window and connecting
+	dialogs. This makes it clear which callsign is being used so
+	that the operator will be aware that it must match the flight
+	computer value or no communication will work.
+      </listitem>
+      <listitem>
+	When downloading flight data, display the block number so that
+	the user has some sense of progress. Unfortunately, we don't
+	know how many blocks will need to be downloaded, but at least
+	it isn't just sitting there doing nothing for a long time.
+      </listitem>
+      <listitem>
+	Add GPS data and a map to the graph window. This lets you see
+	a complete summary of the flight without needing to 'replay'
+	the whole thing.
+      </listitem>
+    </itemizedlist>
+  </para>
+  <para>
+    Distribution Changes
+    <itemizedlist>
+      <listitem>
+	Distribute Mac OS X packages in disk image ('.dmg') format to
+	greatly simplify installation.
+      </listitem>
+      <listitem>
+	Provide version numbers for the shared Java libraries to
+	ensure that upgrades work properly, and to allow for multiple
+	Altus Metrum software packages to be installed in the same
+	directory at the same time.
+      </listitem>
+    </itemizedlist>
+  </para>
+</article>