doc: Create release notes for version 1.4

Signed-off-by: Keith Packard <keithp@keithp.com>

3 files changed, 189 insertions, 1 deletions

diff --git a/doc/Makefile b/doc/Makefile
index 05a49927..254e63c4 100644
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -14,7 +14,8 @@ RELNOTES=\
 	release-notes-1.2.1.html \
 	release-notes-1.3.html \
 	release-notes-1.3.1.html \
-	release-notes-1.3.2.html
+	release-notes-1.3.2.html \
+	release-notes-1.4.html
 
 PICTURES=\
 	altosui.png \
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 39b3998a..f91ac191 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -5299,6 +5299,13 @@ NAR #88757, TRA #12200
   <appendix>
     <title>Release Notes</title>
     <simplesect>
+      <title>Version 1.4</title>
+      <xi:include
+	  xmlns:xi="http://www.w3.org/2001/XInclude"
+	  href="release-notes-1.4.xsl"
+	  xpointer="xpointer(/article/*)"/>
+    </simplesect>
+    <simplesect>
       <title>Version 1.3.2</title>
       <xi:include
 	  xmlns:xi="http://www.w3.org/2001/XInclude"
diff --git a/doc/release-notes-1.4.xsl b/doc/release-notes-1.4.xsl
new file mode 100644
index 00000000..43944bbd
--- /dev/null
+++ b/doc/release-notes-1.4.xsl
@@ -0,0 +1,180 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+"/usr/share/xml/docbook/schema/dtd/4.5/docbookx.dtd">
+
+<article>
+  <para>
+    Version 1.4 is a major release. It includes support for our new
+    TeleGPS product, new features and bug fixes in in the flight
+    software for all our boards and the AltosUI ground station
+  </para>
+  <para>
+    AltOS Firmware Changes
+    <itemizedlist>
+      <listitem>
+	<para>
+	  Add support for TeleGPS boards.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Replace the 'dit dit dit' tones at startup with the current
+	  battery voltage, measured in tenths of a volt. This lets you
+	  check the battery voltage without needing telemetry, which
+	  is especially useful on EasyMini.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Change state beeping to "Farnsworth spacing", which means
+	  they're quite a bit faster than before, and so they take
+	  less time to send.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Make the beeper tone configurable, making it possible to
+	  distinguish between two Altus Metrum products in the same ebay.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Fix bug preventing the selection of the 'Flight State After'
+	  mode in pyro configuration.
+	</para>
+      </listitem>
+    </itemizedlist>
+  </para>
+  <para>
+    AltosUI new features
+    <itemizedlist>
+      <listitem>
+	<para>
+	  Add zooming and new content types (terrain and road maps) to
+	  map view. Change map storage format from PNG to Jpeg, which
+	  saves a huge amount of disk space. You will need to
+	  re-download all of your pre-loaded map images.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Add a distance measuring device to the maps view. Select
+	  this by using any button other than the left one, or by
+	  pressing shift or control on the keyboard while using the
+	  left button.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Add new 'Ignitor' tab to the flight monitor display for
+	  TeleMega's extra ignitors.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Increase the width of data lines in the graphs to make them
+	  easier to read.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Add additional ignitor firing marks and voltages to the
+	  graph so you can see when the ignitors fired, along with
+	  the ignitor voltages.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Add GPS course, ground speed and climb rate as optional
+	  graph elements.
+	</para>
+      </listitem>
+    </itemizedlist>
+  </para>
+  <para>
+    AltosUI fixes
+    <itemizedlist>
+      <listitem>
+	<para>
+	  When flashing new firmware, re-try opening the device as
+	  sometimes it takes a while for the underlying operating
+	  system to recognize that the device has rebooted in
+	  preparation for the flashing operation.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Hide Tilt Angle in ascent tab for devices that don't have a gyro.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Filter out speed and acceleration spikes caused by ejection
+	  charge firing when computing the maximum values. This
+	  provides a more accurate reading of those maximums.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Fix EasyMini voltage displays. Early EasyMini prototypes
+	  used a 3.0V regulator, and AltosUI still used that value as
+	  the basis of the computation. Production EasyMini boards
+	  have always shipped with a 3.3V regulator. Also, purple
+	  EasyMini boards sensed the battery voltage past the blocking
+	  diode, resulting in a drop of about 150mV from the true
+	  battery voltage. Compensate for that when displaying the
+	  value.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Display error message when trying to configure maximum
+	  flight log size while the flight computer still has flight
+	  data stored.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Handle TeleMetrum and TeleMini eeprom files generated with
+	  pre-1.0 firmware. Those ancient versions didn't report the
+	  log format, so just use the product name instead.
+	</para>
+      </listitem>
+    </itemizedlist>
+  </para>
+  <para>
+    TeleGPS Application
+    <itemizedlist>
+      <listitem>
+	<para>
+	  New application designed for use with TeleGPS boards.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Shares code with AltosUI, mostly just trimmed down to focus
+	  on TeleGPS-related functions.
+	</para>
+      </listitem>
+    </itemizedlist>
+  </para>
+  <para>
+    Documentation changes
+    <itemizedlist>
+      <listitem>
+	<para>
+	  Re-create the drill template images; they should print
+	  correctly from Firefox at least. Ship these as individual
+	  PDF files so they're easy to print.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	  Add a description of the 'Apogee Lockout' setting, which
+	  prevents the apogee charge from firing for a configurable
+	  amount of time after boost.
+	</para>
+      </listitem>
+    </itemizedlist>
+  </para>
+</article>