mjb/altos/src, branch telegps-v0.3

altos: Allow products to disable RDF entirely

2013-08-25T06:22:18+00:00

TeleGPS doesn't ever want RDF Signed-off-by: Keith Packard

altos: Add telegps v0.3 product

2013-08-25T06:21:53+00:00

Signed-off-by: Keith Packard

altos: various cc115l driver hacks

2013-08-20T15:54:44+00:00

Try to recover from TX_FIFO_UNDERFLOW by resetting the chip at idle time. Do a calibration phase during setup. Program power to ramp up to limit key down noise. Signed-off-by: Keith Packard

altos: Wake up on LPC usart ISR only once

2013-08-17T15:45:06+00:00

Instead of waking up after every character, wait until the FIFO is empty to reduce overhead Signed-off-by: Keith Packard

altos: Set default LPC stack to 512 bytes, Em to 384 bytes

2013-08-17T15:44:01+00:00

The default for lpc has been raised to 512 bytes, but Em doesn't have enough RAM for that. Signed-off-by: Keith Packard

altos: Allow ublox to run at other baud rates

2013-08-17T15:40:33+00:00

Provides a configuration option to set the ublox serial baud rate to something other than 57600 baud Signed-off-by: Keith Packard

altos: allow projects to override default config values

2013-08-17T15:36:35+00:00

Override default radio power and APRS interval Signed-off-by: Keith Packard

Merge branch 'master' into telegps-v0.3

2013-08-17T15:33:31+00:00

altos: Make FAT test program link explicitly against libcrypto

2013-08-17T14:01:44+00:00

For some reason, the MD5_Final symbol isn't resolved when linking only against libssl. Signed-off-by: Keith Packard

altos: Remove ao_radio_gpio_bits from normal build

2013-07-03T00:55:24+00:00

Only needed for the CC115L_TRACE code, and it only builds on STM Signed-off-by: Keith Packard