mjb/altos/src, branch new-state

Add --with parameters to configure for compiler selection

2013-10-08T16:22:03+00:00

This allows the user to specify which compiler to use for each target CPU. Also checks to make sure the arm compiler supports -m0 and -m3 cpu type flags. The build now actually uses the specified compilers too. Signed-off-by: Keith Packard

altos/stm: New GAS version requires flags in APSR assignment

2013-10-08T16:20:12+00:00

Signed-off-by: Keith Packard

altos: Rename easymini-v0.1 to easymini-v1.0

2013-10-08T05:01:56+00:00

The production boards are the same as the modified v0.1 boards Signed-off-by: Keith Packard

altos/lpc, altos/stm: ARM requires ISB after switching stack pointers

2013-10-08T04:53:53+00:00

This sticks a barrier in the CPU to prevent using the wrong stack register past the change. Signed-off-by: Keith Packard

altos: Don't require an LED for ao_flight

2013-10-08T04:51:30+00:00

EasyMini has no LEDs. Deal with it. Signed-off-by: Keith Packard

altos: Set TeleMini v2.0 USB ID correctly

2013-09-19T05:29:25+00:00

Uses 0x0027 Signed-off-by: Keith Packard

altos/telemetrum-v2.0: Use red LED during boot time

2013-09-15T21:29:46+00:00

If the LED is stuck on, then the board has failed to initialize, so use red instead of green as a warning indicator. Signed-off-by: Keith Packard

altos/telemini-v2.0: Change initialization order

2013-09-15T21:29:09+00:00

Make sure busses are running before devices are initialized Signed-off-by: Keith Packard

altos: Stop copying cc1111 binaries to the altos/src dir

2013-09-15T21:26:55+00:00

Just clutters up that directory. Signed-off-by: Keith Packard

altos: Add nanopeak-v0.1

2013-09-15T21:15:06+00:00

The same as micropeak, just a few different pins Signed-off-by: Keith Packard