mjb/altos/src, branch debian/1.6.3-1

Ignore some built files for 1.6.3

2016-05-07T00:10:14+00:00

Signed-off-by: Keith Packard

altos: Make sure AO_MMA655X_INVERT is declared where needed

2016-05-02T23:19:39+00:00

Add #define AO_MMA655X_INVERT 0 to existing products which didn't declare it at all. This will make sure the value is set correctly for each new board. Signed-off-by: Keith Packard

Revert "altos/stm: Run scheduler code on interrupt stack"

2016-04-30T15:51:53+00:00

This reverts commit 6a9546413d6a236c010e806b50506d870961d074. This causes the device to stop reliably handling interrupts.

altos: Clear packet queue when starting packet master

2016-04-25T22:50:58+00:00

This avoids overfilling the packet buffer when disconnected. Applications using packet mode shouldn't expect that output be saved across master sessions. Signed-off-by: Keith Packard

altos/telebt-v3.0: Flip CTS/RTS pins for BT module

2016-04-25T22:49:45+00:00

These are wired backwards, so ask that the right pins be used, which requires switching to software control of the pins. Signed-off-by: Keith Packard

altos/stm32l: Add support for software-driven HW flow control

2016-04-25T22:48:47+00:00

This allows applications to request that the flow control bits be driven from software rather than hardware, permitting more flexible pin configuration. Signed-off-by: Keith Packard

altos: Use TXE instead of TC for serial on STM32l

2016-04-25T15:49:16+00:00

Using TXE allows for full-speed communication, rather than waiting for each byte to be transmitted before inserting the next into the queue. Signed-off-by: Keith Packard

Debug bits for telebt

2016-04-25T15:47:45+00:00

altos: avoid mixed declarations and code in ao_task.c

2016-04-20T03:21:30+00:00

sdcc can't handle this. Signed-off-by: Keith Packard

altos/telefiretwo-v0.2: Change alarm names in comment

2016-04-20T03:21:30+00:00

The PCB is labeled 'A' and 'B'. Signed-off-by: Keith Packard