mjb/altos/src, branch 1.6.0.4AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=1.6.0.42015-06-26T01:43:13+00:00altos/telebt-v3.0: Report battery voltage correctly2015-06-26T01:43:13+00:00Keith Packardkeithp@keithp.com2015-06-26T01:42:29+00:00urn:sha1:ee1b0bd05bedb8a5a631cc79c77fde8fd920ac38
There was an extra %d, and an extra ':' in the output, making the UI
not parse the voltage correctly
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/telelco: Show box voltage with pad knob instead of firing button2015-05-25T23:26:01+00:00Keith Packardkeithp@keithp.com2015-05-25T23:26:01+00:00urn:sha1:dcbd87bc685924a6587a5f4dae47d34f417601b0
Turn left past '1' and see the firing box battery voltage instead of
pushing the firing button with the box disarmed. This seems like a
safer UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/telelco: Display telefire battery voltage2015-05-25T22:49:21+00:00Keith Packardkeithp@keithp.com2015-05-25T22:49:21+00:00urn:sha1:91f617d450c187500593d1ae785958187f68ca14
When the firing button is pressed while unarmed, show the telefire
battery voltage in the display.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Add telelco v0.3 (v0.2 with cc1200 instead of cc1120)2015-05-25T22:47:46+00:00Keith Packardkeithp@keithp.com2015-05-25T22:47:46+00:00urn:sha1:a54aac3361b7bd18f111e5ba06fb89015504b8a4
Signed-off-by: Keith Packard <keithp@keithp.com>
telefire: Report telefire battery voltage over telemetry link2015-05-25T20:23:54+00:00Keith Packardkeithp@keithp.com2015-05-25T20:23:54+00:00urn:sha1:9b268351aee44de959dcc4c792189c10a00428fe
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Only set CMAC RSSI value on valid packet received2015-05-25T00:28:07+00:00Keith Packardkeithp@keithp.com2015-05-25T00:28:07+00:00urn:sha1:0e76cb2a7d5db24b6cecdccb6fb8d5bf5527fadf
This ignores spurious packets for the purpose of showing the RSSI
value in telelco/telefire, avoiding warning about 'low RSSI' when the
radio receives noise.
Signed-off-by: Keith Packard <keithp@keithp.com>
telefire: Make 'good' RSSI value configurable2015-05-25T00:27:25+00:00Keith Packardkeithp@keithp.com2015-05-25T00:25:25+00:00urn:sha1:e7c25e3ba04b1e9f8e6fa31e2d464fe96a074dad
Different radios will have different 'good' RSSI values, so let each
product configure it, leaving the default set to -90dBm, which is
a solid signal value for the CC1111.
Signed-off-by: Keith Packard <keithp@keithp.com>
micropeak: Use fast load mode by default in -load script2015-05-19T17:23:09+00:00Keith Packardkeithp@keithp.com2015-05-19T17:23:09+00:00urn:sha1:f3ddaae82215e365726f2a62a3dc46bfb29eb1b5
Speed up flashing in default config
Signed-off-by: Keith Packard <keithp@keithp.com>
microsplash: Add 'publish' target to Makefile2015-05-19T17:22:10+00:00Keith Packardkeithp@keithp.com2015-05-19T17:22:10+00:00urn:sha1:eac71f2b871357ff69581c713059a3741a82a932
This dumps the resulting binary and -load script into the Binaries
directory of the altusmetrumllc repo
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Support 32MHz xtal on cc12002015-05-19T17:17:01+00:00Keith Packardkeithp@keithp.com2015-05-19T17:17:01+00:00urn:sha1:dba00b3d9102db99592f5822a703e64d98ace8bb
I ended up building some cc1200-based boards with 32MHz xtals, so just
make this an option when building the driver.
Signed-off-by: Keith Packard <keithp@keithp.com>