mjb/altos/src/test/ao_aprs_test.c, branch with-pdclib

altos/test: Fix warning in ao_aprs_test

2013-05-08T03:08:01+00:00

Was not forward-declaring ao_radio_send_aprs, causing a warning Signed-off-by: Keith Packard

altos: Get CC115L radio working.

2013-03-30T00:05:36+00:00

This involved figuring out which GPIO signal would reliably indicate that the transmitter was finished; I ended up using the PA_PD bit for this. This also converts all of the radio users to the long packet support as the CC115L has only a 64-byte fifo, not large enough to hold either an RDF tone or a regular AltOS telemetry packet. This also renames the public API for sending APRS packets from ao_radio_send_lots to ao_radio_send_aprs, which is at least more accurate. The workings of that API haven't changed, just the name. Signed-off-by: Keith Packard

altos: Test APRS rounding by using coordinates near the boundary

2012-12-16T21:31:45+00:00

This selects lat/lon and altitude near the rounding boundary to check that the resulting APRS data is correctly computed. Signed-off-by: Keith Packard

altos: Hook APRS up to the radio

2012-12-06T18:12:11+00:00

This adds an arbitrary-length packet writing function to the radio code. Signed-off-by: Keith Packard

altos: Prepare APRS for use within altos itself

2012-12-06T07:39:47+00:00

Make all variables static, const-ify constants, change the public name of the single entry point. Signed-off-by: Keith Packard

altos: Start restructuring APRS code to create and send packets

2012-12-06T06:23:46+00:00

Signed-off-by: Keith Packard

altos: Remove more unused APRS code

2012-12-06T05:22:55+00:00

Getting down to a reasonable amount of code. Signed-off-by: Keith Packard

altos: Strip out everything but the basic position reporting from APRS

2012-12-06T05:08:19+00:00

Any useful data will be sent over the digital link; APRS is strictly for position tracking Signed-off-by: Keith Packard

Signed-off-by: Keith Packard

2012-12-06T05:01:59+00:00

altos: Switch APRS to standard position reporting form Stop using NMEA sentences for position

altos: Generate all of the APRS messages

2012-12-06T04:10:54+00:00

Note that two of them are in NMEA form, which some receivers appear not to parse Signed-off-by: Keith Packard