mjb/altos/src/test/ao_aprs_test.c, branch debian/1.8.6-2

altos/test: Fix tests

2016-10-31T04:24:43+00:00

A couple of fixups for ao_flight_test to dump pyro info only when running in debug mode, and to change the aprs testing Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altos: Extend GPS altitudes to at least 24 bits everywhere

2014-07-11T00:35:44+00:00

Telemetry gets a special 'mode' flag indicating that 24-bit data is present; log files get new data and log readers are expected to detect that via the firmware version number. Signed-off-by: Keith Packard

altos/aprs: Encode last serial number in SSID. Transmit serial in comment

2014-06-20T07:41:17+00:00

This makes it a lot easier to tell which device is sending information, and to receive data from multiple devices on the same receiver. Signed-off-by: Keith Packard

altos: Test APRS altitude encoding

2014-05-31T00:32:52+00:00

Verify fixed point version against naïve implementation Signed-off-by: Keith Packard

altos/test: Get APRS generation test working again

2014-05-21T21:01:27+00:00

APRS now includes sat info, so we have to fake that up to generate an APRS test file Signed-off-by: Keith Packard

altos/test: Fix warning in ao_aprs_test

2013-05-08T03:08:01+00:00

Was not forward-declaring ao_radio_send_aprs, causing a warning Signed-off-by: Keith Packard

altos: Get CC115L radio working.

2013-03-30T00:05:36+00:00

This involved figuring out which GPIO signal would reliably indicate that the transmitter was finished; I ended up using the PA_PD bit for this. This also converts all of the radio users to the long packet support as the CC115L has only a 64-byte fifo, not large enough to hold either an RDF tone or a regular AltOS telemetry packet. This also renames the public API for sending APRS packets from ao_radio_send_lots to ao_radio_send_aprs, which is at least more accurate. The workings of that API haven't changed, just the name. Signed-off-by: Keith Packard

altos: Test APRS rounding by using coordinates near the boundary

2012-12-16T21:31:45+00:00

This selects lat/lon and altitude near the rounding boundary to check that the resulting APRS data is correctly computed. Signed-off-by: Keith Packard

altos: Hook APRS up to the radio

2012-12-06T18:12:11+00:00

This adds an arbitrary-length packet writing function to the radio code. Signed-off-by: Keith Packard