mjb/altos/src/telemetrum-v3.0, branch 1.9

altos/stm: Make beeper driver support all possible tim234 configs

2018-10-19T15:38:32+00:00

And update all users to be explicit about the desired config. Signed-off-by: Keith Packard

altos: Add generic LED driver.

2018-10-13T15:23:25+00:00

This driver uses the generic GPIO functions and allows per-LED port and pin configuration. It supports up to 32 LEDs. Rename SoC-specific LED drivers. Remove enabled parameter to ao_led_init Signed-off-by: Keith Packard

altos: Eliminate 'pin' field from GPIO functions

2018-10-13T15:23:25+00:00

This was used with the 8051 bit-addressing mode to provide single-instruction access to GPIO pins. Signed-off-by: Keith Packard

altos: Use stdbool true/false instead of TRUE/FALSE

2018-10-13T15:22:50+00:00

Signed-off-by: Keith Packard

altos: Switch to newlib-nano for libc on arm

2018-10-13T15:21:58+00:00

Stop using pdclib Signed-off-by: Keith Packard

altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.c

2017-10-22T20:43:07+00:00

Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard

altos: Require SPI speed to be declared for cc1200

2017-02-20T19:16:52+00:00

The cc1200 can't run SPI faster than 10MHz, so make sure every device picks a SPI clock slower than that. Signed-off-by: Keith Packard

altos: Add telemetrum v3.0

2016-07-12T22:53:47+00:00

Like Telemetrum v2.0, but with cc1200 instead of cc1120 Signed-off-by: Keith Packard