mjb/altos/src/telemega-v1.0/ao_pins.h, branch android-build-update

altos/stm: Make beeper driver support all possible tim234 configs

2018-10-19T15:38:32+00:00

And update all users to be explicit about the desired config. Signed-off-by: Keith Packard

altos: Eliminate 'pin' field from GPIO functions

2018-10-13T15:23:25+00:00

This was used with the 8051 bit-addressing mode to provide single-instruction access to GPIO pins. Signed-off-by: Keith Packard

altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.c

2017-10-22T20:43:07+00:00

Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altos/drivers: Use more reliable byte interface for CC1120 reception

2016-06-30T02:17:45+00:00

This replaces direct register access with function calls to allow that code to respect the hardware requirements. Signed-off-by: Keith Packard

altos: Make sure AO_MMA655X_INVERT is declared where needed

2016-05-02T23:19:39+00:00

Add #define AO_MMA655X_INVERT 0 to existing products which didn't declare it at all. This will make sure the value is set correctly for each new board. Signed-off-by: Keith Packard

altos: Add HAS_COMPANION to new boards with companion connectors

2015-08-21T06:08:17+00:00

Thanks much to Rob Derstadt for discovering this bug! TeleMetrum v2.0, TeleMega, EasyMega, TeleBalloon v2.0 all have companion connectors and yet HAS_COMPANION was not defined. This disabled companion telemetry packets on these products, but otherwise didn't have any effect. Signed-off-by: Keith Packard

altos/telemega-v1.0: Adjust config params to make flight erase work

2014-06-07T18:01:14+00:00

Flight erase records are supposed to be written after the ao_config to eeprom in telemega. They were getting written in the middle of one of the pyro channel config blocks. Put a bunch of space between the two by making the config max 1024 bytes instead of 128 bytes. Set the log erase marker to 0x55 -- eeprom comes from the factory as 0x00, so we use any value other than 0x55 to indicate 'unused' erase slots. Save space for more flight erase blocks; we've got plenty. Signed-off-by: Keith Packard

altos: Report battery voltage instead of S at startup

2014-04-05T07:22:31+00:00

This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard

altos: Add missing ADC divider values for Tmega v1.0

2014-01-15T21:28:16+00:00

Somehow I left these out of the previous commit Signed-off-by: Keith Packard