mjb/altos/src/telemega-v0.1, branch 1.8.3

altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.c

2017-10-22T20:43:07+00:00

Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altos: Make sure AO_MMA655X_INVERT is declared where needed

2016-05-02T23:19:39+00:00

Add #define AO_MMA655X_INVERT 0 to existing products which didn't declare it at all. This will make sure the value is set correctly for each new board. Signed-off-by: Keith Packard

altos: Add HAS_COMPANION to new boards with companion connectors

2015-08-21T06:08:17+00:00

Thanks much to Rob Derstadt for discovering this bug! TeleMetrum v2.0, TeleMega, EasyMega, TeleBalloon v2.0 all have companion connectors and yet HAS_COMPANION was not defined. This disabled companion telemetry packets on these products, but otherwise didn't have any effect. Signed-off-by: Keith Packard

altos: Update other CONFIG_EEPROM users to set LOG_ERASE_MARK

2014-06-07T19:34:14+00:00

All products placing config and erase marks in on-CPU EEPROM needs to configure the erase code correctly. Signed-off-by: Keith Packard

altos: Report battery voltage instead of S at startup

2014-04-05T07:22:31+00:00

This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard

altos: Report battery, apogee and main voltages over APRS

2014-01-15T20:40:26+00:00

This makes APRS more usable when you mute the RF audio on the HT. Signed-off-by: Keith Packard

altos: Switch APRS to compressed position format

2014-01-15T07:21:40+00:00

This provides lat/lon/alt in fewer bytes while improving precision. Signed-off-by: Keith Packard

altos: Try IMU self-test 10 times before giving up

2013-12-19T04:32:05+00:00

This should keep the device from failing to boot unless the IMU is actually broken. Oh, and if self test does fail, this places the flight computer in 'Invalid' state rather than panic. Signed-off-by: Keith Packard

altos: Make TeleMega v0.1 work more like TeleMega v1.0

2013-12-18T09:12:11+00:00

I've still got one working v0.1 board which is useful for testing stuff, so make it work more like the released TeleMega: * Use E for drogue, F for main * Use on-chip eeprom for config * Fix ADC report printf to match Signed-off-by: Keith Packard