mjb/altos/src/telelco-v2.0/ao_pins.h, branch master

altos/stm: Make beeper driver support all possible tim234 configs

2018-10-19T15:38:32+00:00

And update all users to be explicit about the desired config. Signed-off-by: Keith Packard

altos: Add generic LED driver.

2018-10-13T15:23:25+00:00

This driver uses the generic GPIO functions and allows per-LED port and pin configuration. It supports up to 32 LEDs. Rename SoC-specific LED drivers. Remove enabled parameter to ao_led_init Signed-off-by: Keith Packard

altos/telelco-v2.0: Fix AO_ADC_DUMP

2018-06-17T08:28:36+00:00

Was printing p.v_batt instead of (p)->v_batt. I don't know why the former even worked. Signed-off-by: Keith Packard

altos/telelco: Remove STATIC_TEST code from stand-alone LCO boxes

2018-06-01T05:45:49+00:00

This command conflicts with the 'debug' command in these devices and so wasn't usable anyways. Signed-off-by: Keith Packard

altos/telelco-v2.0: Set HAS_ADC_SINGLE to enable HSI timer

2018-05-29T02:19:43+00:00

The ADC unit requires the HSI timer to run, so make sure it's enabled for this device. Signed-off-by: Keith Packard

altos/telelco-v2.0: Display local batt voltage at startup

2018-05-28T23:10:51+00:00

Show the battery voltage for a second at startup. Signed-off-by: Keith Packard

altos/telelco-v2.0: Fix button names and pin mappings. Add drag LED.

2018-05-28T21:41:51+00:00

Signed-off-by: Keith Packard

altos/telelco-v2.0: Mixed up the select_button pin (is E0, was set to E13)

2018-05-28T21:35:18+00:00

Signed-off-by: Keith Packard

altos/telelco-v2.0: Use single-step quadrature code

2018-05-28T21:26:12+00:00

Signed-off-by: Keith Packard

altos/telelco-v2.0: Reduce quadrature debounce time

2018-05-28T20:08:33+00:00

The optical encoders shouldn't bounce at all; let's try a minimal value. Signed-off-by: Keith Packard