mjb/altos/src/telegps-v2.0, branch debian/1.8.7-2

altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.c

2017-10-22T20:43:07+00:00

Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard

altos/telegps-v2.0: Enable USB connect monitoring

2017-09-18T22:05:02+00:00

Disable radios when plugged in to USB to save power and avoid being noisy. Signed-off-by: Keith Packard

production TeleGPS v2.0 use a 16Mhz crystal for the SOC

2017-09-18T22:01:21+00:00

publish support for TeleGPS v2.0

2017-09-17T18:41:50+00:00

altos/telegps-v2.0: Disable external serial port to save ROM

2017-05-02T18:49:21+00:00

We'll have to rewrite some of the serial code to avoid sucking memory here. Signed-off-by: Keith Packard

altos/telegps-v2.0: Reorder initialization sequence

2017-05-01T00:42:23+00:00

This tries to be a bit more logical about the board initialization sequence, starting with the OS, then the support hardware, internal drivers, external drivers and finally services. Signed-off-by: Keith Packard

altos/telegps-v2.0: CC1200 CS is PA1, not PA5.

2017-05-01T00:41:21+00:00

Also remove some unneeded config of an additional pin for MCU wakeup, which the CC1120 needs but the CC1200 does not. Signed-off-by: Keith Packard

altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1

2017-05-01T00:40:26+00:00

Turn on serial 2 and use it for GPS. Signed-off-by: Keith Packard

altos/telegps-v2.0: Remove some unneeded defines

2017-05-01T00:39:54+00:00

HAS_MS5607 and HAS_RADIO_RECV aren't useful. Signed-off-by: Keith Packard

altos/telegps-v2.0: Battery ADC input is on PB1, not PA0

2017-05-01T00:39:03+00:00

Rewire as needed. Signed-off-by: Keith Packard