mjb/altos/src/telegps-v2.0, branch 1.8.1.1

altos/telegps-v2.0: Disable external serial port to save ROM

2017-05-02T18:49:21+00:00

We'll have to rewrite some of the serial code to avoid sucking memory here. Signed-off-by: Keith Packard

altos/telegps-v2.0: Reorder initialization sequence

2017-05-01T00:42:23+00:00

This tries to be a bit more logical about the board initialization sequence, starting with the OS, then the support hardware, internal drivers, external drivers and finally services. Signed-off-by: Keith Packard

altos/telegps-v2.0: CC1200 CS is PA1, not PA5.

2017-05-01T00:41:21+00:00

Also remove some unneeded config of an additional pin for MCU wakeup, which the CC1120 needs but the CC1200 does not. Signed-off-by: Keith Packard

altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1

2017-05-01T00:40:26+00:00

Turn on serial 2 and use it for GPS. Signed-off-by: Keith Packard

altos/telegps-v2.0: Remove some unneeded defines

2017-05-01T00:39:54+00:00

HAS_MS5607 and HAS_RADIO_RECV aren't useful. Signed-off-by: Keith Packard

altos/telegps-v2.0: Battery ADC input is on PB1, not PA0

2017-05-01T00:39:03+00:00

Rewire as needed. Signed-off-by: Keith Packard

altos/telegps-v2.0: Set CPU clock to 48MHz instread of 96MHz

2017-05-01T00:38:21+00:00

Turns out the CPU doesn't run well at that speed. Who would have guessed? Signed-off-by: Keith Packard

altos/telegps-v2.0: Adjust LED config

2017-05-01T00:37:45+00:00

The LED is green, not red. Use it for panic and GPS lock. Signed-off-by: Keith Packard

telegps-v2.0: slow down radio chip spi speed

2017-04-26T04:58:00+00:00

altos/telegps-v2.0: git ignore make results

2017-04-25T05:27:43+00:00

Signed-off-by: Keith Packard