mjb/altos/src/telegps-v1.0, branch 1.8.3

altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.c

2017-10-22T20:43:07+00:00

Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard

altos/telegps: Inherit LDFLAGS from lpc make specification

2017-04-14T03:20:13+00:00

Somethings messed up with cortex-M0 linking, and this isn't helping as it overrides the LDFLAGS coming from the architecture. Signed-off-by: Keith Packard

altos: Define CC115L spi speed in each product

2017-04-04T22:59:56+00:00

Different SoCs have different SPI speeds available; have each product specify the speed to use instead of trying to use 4Mhz everywhere. Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

telegps-v1.0: Document how SN 1959 was fixed

2016-06-10T05:03:45+00:00

SN1959 was fixed by jumpering pin 8 to pin 10 so that the DONE_INT_PIN could be switched from PIO 2 to PIO 4 as pin 8 appeared to have failed. Signed-off-by: Keith Packard

telegps-v1.0: Provide one log and append to it

2014-08-18T03:59:45+00:00

Instead of creating per-flight logs, create a single log and append data to it each time TeleGPS is powered on. This avoids potentially running out of log space just because the device is powered off/on. Signed-off-by: Keith Packard

altos/telegps: Set default log to 496kB for 4 logs

2014-06-13T04:53:07+00:00

This leaves space for four flight logs. Signed-off-by: Keith Packard

altos/telegps: Build .ihx versions for TeleGPS

2014-06-12T06:26:36+00:00

Needed to load with java Signed-off-by: Keith Packard

altos: Set TeleGPS default log size to half of avaiable memory

2014-06-10T16:55:04+00:00

LPC11U14 doesn't have on-chip config space, so we're consuming a block of external flash. As a result, only 1984kB are available for logging. Set the default log size to half of that to store two flights. Signed-off-by: Keith Packard

altos: Simplify tracker logic, removing boost detect

2014-06-10T16:54:42+00:00

This removes the ao_flight_state value from the tracker code and makes it simply log position information when the device has moved within the last 10 log intervals. This also changes the configuration parameters to define what 'motionless' means, and what interval to configure the GPS receiver for, log data and send telemetry. Signed-off-by: Keith Packard