mjb/altos/src/telegps-v1.0/ao_pins.h, branch master

altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.c

2017-10-22T20:43:07+00:00

Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard

altos: Define CC115L spi speed in each product

2017-04-04T22:59:56+00:00

Different SoCs have different SPI speeds available; have each product specify the speed to use instead of trying to use 4Mhz everywhere. Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

telegps-v1.0: Document how SN 1959 was fixed

2016-06-10T05:03:45+00:00

SN1959 was fixed by jumpering pin 8 to pin 10 so that the DONE_INT_PIN could be switched from PIO 2 to PIO 4 as pin 8 appeared to have failed. Signed-off-by: Keith Packard

telegps-v1.0: Provide one log and append to it

2014-08-18T03:59:45+00:00

Instead of creating per-flight logs, create a single log and append data to it each time TeleGPS is powered on. This avoids potentially running out of log space just because the device is powered off/on. Signed-off-by: Keith Packard

altos/telegps: Set default log to 496kB for 4 logs

2014-06-13T04:53:07+00:00

This leaves space for four flight logs. Signed-off-by: Keith Packard

altos: Set TeleGPS default log size to half of avaiable memory

2014-06-10T16:55:04+00:00

LPC11U14 doesn't have on-chip config space, so we're consuming a block of external flash. As a result, only 1984kB are available for logging. Set the default log size to half of that to store two flights. Signed-off-by: Keith Packard

altos: Enable ADC for TeleGPS v1.0 battery voltage measuring

2014-06-08T05:30:26+00:00

Signed-off-by: Keith Packard

altos: Add telegps-v1.0 code and loader

2014-06-06T04:42:10+00:00

Signed-off-by: Keith Packard