mjb/altos/src/telegps-v0.1, branch new-state

altos: Add 'g' command to ublox GPS code.

2013-05-16T05:11:21+00:00

Take the gps_dump function from ao_gps_skytraq.c and move it to a new file so it can be shared with the u-blox driver. That affects every skytraq and u-blox user as they need to include the new file. Signed-off-by: Keith Packard

altos/stm: Create per-product flash loaders

2013-05-08T04:30:27+00:00

Split the flash loader prototype into pieces so that each product can build a custom flash loader with very little code. Signed-off-by: Keith Packard

altos: Use flash loader on all STM products

2013-05-08T04:30:26+00:00

Includes the boot chain stuff Signed-off-by: Keith Packard

Set telegps USB id to 0025

2013-04-02T23:43:53+00:00

It was accidentally using the same ID as megadongle... Signed-off-by: Keith Packard

altos: Horrible kludge -- disable radio while talking with SD card

2013-04-01T09:39:35+00:00

The SD card really doesn't like the RFI generated by our enormous radio, so just lock the radio out while working with the card. Signed-off-by: Keith Packard

altos: Add defines for the specific pins used for telegps SPI

2013-04-01T09:10:14+00:00

These aren't needed at this point, but who knows? Signed-off-by: Keith Packard

altos: Provide build hooks for sampling profiler in telegps

2013-04-01T09:07:06+00:00

Might prove useful if the CPU is ever doing anything? Signed-off-by: Keith Packard

altos: Increase SD card timeout at startup time

2013-03-31T20:55:16+00:00

Sometimes the SD card takes 'a while' to go into idle mode at first power up. Just hang around waiting for a long time. Signed-off-by: Keith Packard

altos: Add logging and telem to telegps

2013-03-30T08:33:49+00:00

This turns on telemetry, APRS, RDF and data logging for telegps. Data is logged as soon as GPS has a date to create the right filename, using files of the form YYYYMMDD.LOG which just barely fits in a FAT filename. Telemetry/RDF/APRS are all separately controllable. Signed-off-by: Keith Packard

altos: Get CC115L radio working.

2013-03-30T00:05:36+00:00

This involved figuring out which GPIO signal would reliably indicate that the transmitter was finished; I ended up using the PA_PD bit for this. This also converts all of the radio users to the long packet support as the CC115L has only a 64-byte fifo, not large enough to hold either an RDF tone or a regular AltOS telemetry packet. This also renames the public API for sending APRS packets from ao_radio_send_lots to ao_radio_send_aprs, which is at least more accurate. The workings of that API haven't changed, just the name. Signed-off-by: Keith Packard