mjb/altos/src/telegps-v0.1/Makefile, branch 1.2.9.4

altos: Allow use of internal EEPROM for config storage

2013-11-12T07:27:31+00:00

This stops exposing eeprom as 'storage' and instead exposes it with a separate eeprom API so that it can be used for config storage without also using it for flight log storage. The config code has been changed to allow it to either use storage for configuration data or eeprom. Signed-off-by: Keith Packard

altos: Use installed pdclib

2013-10-10T07:01:26+00:00

Switch over to the installed pdclib everywhere Signed-off-by: Keith Packard

altos: Add 'g' command to ublox GPS code.

2013-05-16T05:11:21+00:00

Take the gps_dump function from ao_gps_skytraq.c and move it to a new file so it can be shared with the u-blox driver. That affects every skytraq and u-blox user as they need to include the new file. Signed-off-by: Keith Packard

altos: Use flash loader on all STM products

2013-05-08T04:30:26+00:00

Includes the boot chain stuff Signed-off-by: Keith Packard

Set telegps USB id to 0025

2013-04-02T23:43:53+00:00

It was accidentally using the same ID as megadongle... Signed-off-by: Keith Packard

altos: Provide build hooks for sampling profiler in telegps

2013-04-01T09:07:06+00:00

Might prove useful if the CPU is ever doing anything? Signed-off-by: Keith Packard

altos: Increase SD card timeout at startup time

2013-03-31T20:55:16+00:00

Sometimes the SD card takes 'a while' to go into idle mode at first power up. Just hang around waiting for a long time. Signed-off-by: Keith Packard

altos: Add logging and telem to telegps

2013-03-30T08:33:49+00:00

This turns on telemetry, APRS, RDF and data logging for telegps. Data is logged as soon as GPS has a date to create the right filename, using files of the form YYYYMMDD.LOG which just barely fits in a FAT filename. Telemetry/RDF/APRS are all separately controllable. Signed-off-by: Keith Packard

altos: Get CC115L radio working.

2013-03-30T00:05:36+00:00

This involved figuring out which GPIO signal would reliably indicate that the transmitter was finished; I ended up using the PA_PD bit for this. This also converts all of the radio users to the long packet support as the CC115L has only a 64-byte fifo, not large enough to hold either an RDF tone or a regular AltOS telemetry packet. This also renames the public API for sending APRS packets from ao_radio_send_lots to ao_radio_send_aprs, which is at least more accurate. The workings of that API haven't changed, just the name. Signed-off-by: Keith Packard

altos: Hook up the FAT16 and SD card support to telegps

2013-03-27T08:14:15+00:00

Signed-off-by: Keith Packard