mjb/altos/src/telefire-v0.2, branch v1.6.3.1

altos: Document which TeleFire alarm pins are which

2014-08-15T02:08:19+00:00

Signed-off-by: Keith Packard

altos/telefire,telelco: Add HAS_RADIO_RATE to launch system software

2014-07-13T06:52:05+00:00

This lets us set the rate to a lower value to improve range. 9600 baud works great; 2400 baud makes the initial search take a long time. Signed-off-by: Keith Packard

altos: Use 32-bits for flight state data (alt/speed/accel)

2014-07-11T00:35:44+00:00

Stores 32-bits for all of the flight parameters. Uses 64-bit intermediates for kalman computation. Signed-off-by: Keith Packard

altos: Call ao_telemetry_reset_interval when telemetry rate changes

2014-07-05T07:38:09+00:00

This lets the radio code adjust the telemetry packet sending pattern when the data rate changes. Signed-off-by: Keith Packard

altos: Rename 'core' to 'kernel'

2014-04-05T07:22:29+00:00

core remains a bad name to use -- dirvish skips files (and directories, it seems) with that name. Signed-off-by: Keith Packard

altos: Clean up .gitignore and add a few random files

2013-11-12T05:54:57+00:00

Signed-off-by: Keith Packard

altos: Stop copying cc1111 binaries to the altos/src dir

2013-09-15T21:26:55+00:00

Just clutters up that directory. Signed-off-by: Keith Packard

altos/telefire: Radio status (no data, weak data, good data) on LEDs

2013-06-20T05:45:54+00:00

Instead of blinking RX/TX, report the radio status on the telefire nodes, just like telelco does. This makes the LEDs on telefire *exactly the same* as the LEDs on telelco, which seems like a good idea. Signed-off-by: Keith Packard

altos: Add telefire v0.2 support

2013-06-09T17:00:54+00:00

Signed-off-by: Keith Packard