mjb/altos/src/teledongle-v3.0, branch 1.9

altos: Add generic LED driver.

2018-10-13T15:23:25+00:00

This driver uses the generic GPIO functions and allows per-LED port and pin configuration. It supports up to 32 LEDs. Rename SoC-specific LED drivers. Remove enabled parameter to ao_led_init Signed-off-by: Keith Packard

altos: Require SPI speed to be declared for cc1200

2017-02-20T19:16:52+00:00

The cc1200 can't run SPI faster than 10MHz, so make sure every device picks a SPI clock slower than that. Signed-off-by: Keith Packard

altos: Flash all LEDS during power on

2016-08-04T16:54:16+00:00

This tests the LEDS to make sure they all work on the following devices: easymega-v1.0 telebt-v3.0 teledongle-v3.0 telemega-v1.0 telemega-v2.0 telemetrum-v2.0 Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ram

2015-02-05T23:01:03+00:00

The old USB code had static in/out buffers in ram Signed-off-by: Keith Packard

altos: Rename teledongle-v1.9 as teledongle-v3.0

2015-02-05T04:33:04+00:00

No hardware changes from the 1.9 prototypes to the 3.0 final version. Signed-off-by: Keith Packard