mjb/altos/src/telebt-v3.0, branch debian/1.6-1

altos/telebt-v3.0: Set initial radio cal to a sensible value

2015-02-05T04:30:15+00:00

CC1200 uses a different xtal than CC1120, so the default calibration needs to change. This value hit 434.550 on SN 2407, so it seems like a reasonable place to start. Signed-off-by: Keith Packard

altos/telebt-v3.0: Add monitor bits

2015-02-01T15:57:14+00:00

Will be useful to actually be able to receive telemetry Signed-off-by: Keith Packard

altos/telebt-v3.0: Turn red LED off after initialization

2015-02-01T15:44:07+00:00

This lets the user know the device successfully initialized. Signed-off-by: Keith Packard

altos/telebt-v3.0: Fix stdio setup for BTM

2015-02-01T15:43:06+00:00

Make sure the BTM module is allowed to be included in stdio, but delay adding that until the BT link is running. Signed-off-by: Keith Packard

And, also add the TeleBT v3.0 flash loader Makefile

2015-01-30T13:04:50+00:00

Signed-off-by: Keith Packard

Oops, forgot the TeleBT-v3.0 Makefile

2015-01-30T13:03:55+00:00

git doesn't warn about files named 'Makefile' because they're supposed to be generated... Signed-off-by: Keith Packard

altos: Add support for TeleBT v3.0

2015-01-24T19:18:59+00:00

Add support to the BTM driver for non-CC1111 interrupts Add HW flow control to STM serial driver Signed-off-by: Keith Packard