mjb/altos/src/stm/ao_usb_stm.c, branch 1.1

altos: reorder stm USB state stores to avoid races

2012-06-27T21:35:56+00:00

Must set ao_usb_in_pending before telling USB about new data or an interrupt could arrive at the wrong time to clear it. Same for ao_usb_in_flushed. Without these changes, I've seen the USB bus lock up on occasion, waiting for an IN packet to consume data, but with no IN data pending in the hardware. Signed-off-by: Keith Packard

altos: stm: delay during USB config with pull-up off

2012-05-08T04:49:24+00:00

This makes sure that a reboot will reliably cause the device to disconnect from the USB bus. Signed-off-by: Keith Packard

altos: Starting to write cc1120 driver

2012-04-17T18:01:18+00:00

This does "something" in radio test mode, appearing to generate a 730MHz signal. Signed-off-by: Keith Packard

altos: Correct STM USB driver

2012-04-14T21:04:29+00:00

Configure endpoint registers correctly now. Restructure code to make sure we send the right IN packets. Signed-off-by: Keith Packard

altos: Massive product config cleanup

2012-04-14T21:04:29+00:00

Support multiple serial ports more cleanly Split out parts of ao.h into separate feature header files Signed-off-by: Keith Packard

altos: Add STM USB driver

2012-04-14T20:22:02+00:00

Emulates the usual CDC-ACM device Signed-off-by: Keith Packard