mjb/altos/src/stm/ao_spi_stm.c, branch altosdroid

altos: include targe SPI speed in get request

2012-06-27T21:34:53+00:00

STM needs it to be provided when enabling the SPI device, so just fix AVR and cc1111 to do the same. Signed-off-by: Keith Packard

altos: Optimize FEC encode and decode

2012-06-27T06:11:10+00:00

Integrate interleaving, CRC and padding within the decode/encode functions. Provide for ISR priorities so that the 1120 RX interrupt takes precedence over the other interrupts or we risk losing bits. Optimize the viterbi decoder a bit (goes from 10ms per packet to 7ms per packet). Signed-off-by: Keith Packard

altos: Crank down STM SPI speed for MM

2012-06-21T16:46:50+00:00

The cc1120 is noisy enough to break SPI data transfers at 4MHz, so crank things down to 1MHz. It's "stable" now, but clearly needs a filter and shorter traces. Signed-off-by: Keith Packard

altos: Reduce STM SPI data rate to 4MHz

2012-06-16T05:41:17+00:00

cc1120 doesn't want more than 6.1MHz, otherwise it gets very angry. Signed-off-by: Keith Packard

altos: Starting to write cc1120 driver

2012-04-17T18:01:18+00:00

This does "something" in radio test mode, appearing to generate a 730MHz signal. Signed-off-by: Keith Packard

altos: Increase STM SPI speed to PCLK/4

2012-04-10T05:24:36+00:00

The pressure sensor seems happy at this speed. Signed-off-by: Keith Packard

altos: Slow STM SPI down a bit so the MS5607 returns values

2012-04-09T07:06:35+00:00

It's still not working right, but at least it returns something other than all zeros... Signed-off-by: Keith Packard

altos: STM SPI is not using interrupts itself

2012-04-08T01:54:32+00:00

All SPI transfers are done via DMA, so the DMA interrupts suffice. Signed-off-by: Keith Packard

altos: Disable STM SPI transceiver when idle

2012-04-07T05:39:12+00:00

Should save a bit of power. Signed-off-by: Keith Packard

altos: Add DMA, SPI and MS5607 drivers

2012-04-07T01:07:07+00:00

Signed-off-by: Keith Packard