mjb/altos/src/stm/altos.ld, branch debian/1.4-1

altos: Use flash loader on all STM products

2013-05-08T04:30:26+00:00

Includes the boot chain stuff Signed-off-by: Keith Packard

altos: Use separate exception stack on STM32L

2013-05-08T03:08:00+00:00

This reserves 512 bytes of memory for a stack, then makes sure that exceptions continue to use that stack while processes use the per-task stack. Signed-off-by: Keith Packard

altos: Place STM config values at fixed addresses for re-use

2012-07-17T08:24:52+00:00

Just like cc1111, stick the serial number and radio calibration values at known fixed addresses so that when re-flashing the board, we can go find the existing values. Signed-off-by: Keith Packard

altos/stm: Force STM stack to start at the top of RAM

2012-07-14T08:24:14+00:00

Using a fixed size means crashing if there's not enough space for that, or wasting memory if there's too much. Signed-off-by: Keith Packard

Use -Os for STM apps. Fix altos.ld to matchall .rodata* sections

2012-03-29T04:37:04+00:00

Without .rodata*, it would stick the flash copy of the data on top of any further .rodata* sections. Fortunately, the linker catches that and complains... Signed-off-by: Keith Packard

Add STM platform and stm-bringup demo program

2012-03-29T04:37:02+00:00

The stm-bringup doesn't run altos, it just initializes the device and writes stuff over a serial port. Works on the STM32L Discovery board at least, should do stuff on other boards too. Signed-off-by: Keith Packard