mjb/altos/src/megametrum-v0.1/Makefile, branch 1.1AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=1.12012-08-26T16:53:16+00:00altos: Trigger sample complete when all data are ready2012-08-26T16:53:16+00:00Keith Packardkeithp@keithp.com2012-08-26T16:53:16+00:00urn:sha1:f89e7de20374141b367205aa517a08ee203bfaf3
This has each sensor mark a bit in the current data record which is
then sent for processing when all of the data are present.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Add MMA655X driver2012-08-19T04:26:34+00:00Keith Packardkeithp@keithp.com2012-08-19T04:26:34+00:00urn:sha1:93db8febda03d9a02c5c1ccdc6ad44eaf00a433b
Just debug code at this point, will complete on real hardware
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Place STM config values at fixed addresses for re-use2012-07-17T08:24:52+00:00Keith Packardkeithp@keithp.com2012-07-17T08:24:52+00:00urn:sha1:a5d873d47b3b16ca32559b4de668bf07b25eddb0
Just like cc1111, stick the serial number and radio calibration values
at known fixed addresses so that when re-flashing the board, we can go
find the existing values.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: megametrum depends on ao_companion.h2012-07-16T22:34:01+00:00Keith Packardkeithp@keithp.com2012-07-16T22:34:01+00:00urn:sha1:0edb5616a70fd480317acc99ec3c28c662aa8556
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/megametrum: Support the four additional pyro channels2012-07-14T08:29:50+00:00Keith Packardkeithp@keithp.com2012-07-14T08:29:50+00:00urn:sha1:37032e4b0cbac4c823e3dd18e60ad8900e9ceff1
These use the new pyro code to allow for some flexibility in programming.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Have 'make clean' remove all programs, even old ones2012-07-11T20:49:26+00:00Keith Packardkeithp@keithp.com2012-07-11T20:49:26+00:00urn:sha1:18431c88c8a6cb267922b97192e8b7ddb88d0e7e
This makes sure that changing version numbers doesn't leave old
compiled output lying around.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Rename *_mm.c back to *.c2012-07-10T22:11:36+00:00Keith Packardkeithp@keithp.com2012-07-10T22:11:36+00:00urn:sha1:1ae3f467a1d7be2fc3b1a45ba12568a3a25a0099
Was just a temporary hack to keep cc1111 products building during MM development.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Move profiling settings to Makefile2012-07-04T04:02:20+00:00Keith Packardkeithp@keithp.com2012-07-04T04:02:20+00:00urn:sha1:31b05454ec8d90b89fa3039563ff0e86ae80b2a0
Instead of splitting the changes across Makefile and ao_pins.h, put
them both in Makefile to simplify enabling profiling.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Disable mag sensor for megametrum2012-06-28T06:04:25+00:00Keith Packardkeithp@keithp.com2012-06-28T06:04:25+00:00urn:sha1:f9f65211c378849270a6138fda05ed2a166f7d82
It doesn't work unless USB is connected or occasionally while the
debug port is enabled. It's mystic.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Make profiling Viterbi decoder more useful2012-06-28T02:47:52+00:00Keith Packardkeithp@keithp.com2012-06-28T02:47:52+00:00urn:sha1:bd21c050fd8b96b33ab6859c942bf55cf2b91868
This blocks starting the decoder until all of the data have arrived so
that the time spent in the decoder is easily computed.
Signed-off-by: Keith Packard <keithp@keithp.com>