mjb/altos/src/lpc, branch branch-1.3

altos: Switch APRS to compressed position format

2014-01-15T07:21:40+00:00

This provides lat/lon/alt in fewer bytes while improving precision. Signed-off-by: Keith Packard

altos: Turn on -Werror for STM and LPC builds

2013-12-21T07:04:43+00:00

Now that the build completes with no warnings, make future warnings into errors. Signed-off-by: Keith Packard

altos: Turn on warnings for LPC products too

2013-12-21T07:02:51+00:00

Signed-off-by: Keith Packard

altos/lpc: Missing */ in definition of PIO0_4

2013-12-21T07:02:21+00:00

Would maek using these values pretty hard. Signed-off-by: Keith Packard

altos: lpc exti setup was incorrectly testing mode

2013-12-21T07:00:43+00:00

Check for NOCONFIGURE bit was missing parens Signed-off-by: Keith Packard

altos: Clean up warnings for LPC products

2013-12-21T06:59:35+00:00

Unused varibles, functions and parameters. Signed-off-by: Keith Packard

altos/lpc: Stop sending SETUP IN when the requested size is reached

2013-12-19T08:08:50+00:00

The host won't keep asking for SETUP IN packets once it has received the amount of data requested, so check to see if we've sent that much and flip back to IDLE state if so. Signed-off-by: Keith Packard

altos/lpc: Reset less of the device on USB reset.

2013-12-19T07:27:34+00:00

This leaves most of the device configured across USB reset, which appears to help when sending a IN reply to the first SETUP packet; without this change, the IN reply would always get a length of 0, which is fine for SET_ADDRESS, but not for GET_DESCRIPTOR_DEVICE, which OS X appears to send before setting the address (go figure). Signed-off-by: Keith Packard

altos: Build pdclib locally if necessary

2013-12-18T18:01:29+00:00

Signed-off-by: Keith Packard

altos/lpc: Be a bit more resistant to toolchain section name changes

2013-12-18T10:02:12+00:00

Just add some wild cards on the ends of each section name in case the toolchain changes names in the future. Signed-off-by: Keith Packard