mjb/altos/src/lpc, branch 1.9

altos: Create ao_data_fill shared function

2018-10-19T15:37:56+00:00

This fills a data ring entry with all of the current sensor values other than the ADC. It is used in all of the adc completion functions. Signed-off-by: Keith Packard

altos: Clean up AO_ROMCONFIG bits

2018-10-13T15:23:25+00:00

Remove address parameter (doesn't work with gcc), create shared ao_romconfig in kernel. Signed-off-by: Keith Packard

altos: Add generic LED driver.

2018-10-13T15:23:25+00:00

This driver uses the generic GPIO functions and allows per-LED port and pin configuration. It supports up to 32 LEDs. Rename SoC-specific LED drivers. Remove enabled parameter to ao_led_init Signed-off-by: Keith Packard

altos: Eliminate 'pin' field from GPIO functions

2018-10-13T15:23:25+00:00

This was used with the 8051 bit-addressing mode to provide single-instruction access to GPIO pins. Signed-off-by: Keith Packard

altos: Remove 8051 address space specifiers

2018-10-13T15:22:50+00:00

Signed-off-by: Keith Packard

altos: Switch to newlib-nano for libc on arm

2018-10-13T15:21:58+00:00

Stop using pdclib Signed-off-by: Keith Packard

altos/lpc: Make sure USB pull-up is held low at boot for 'a while'

2018-10-09T02:42:09+00:00

Add a delay loop to make sure the host sees the pull-up low for long enough. Signed-off-by: Keith Packard

altos/lpc: Fix stdio wakeup on serial IRQ

2018-08-15T22:40:15+00:00

Should just use USE_SERIAL_0_STDIN directly Signed-off-by: Keith Packard

altos: Make CDC ACM 'line coding' public

2017-05-05T05:10:36+00:00

This allows other systems to see what baud rate the host has requested. Signed-off-by: Keith Packard

altos/lpc: Really fix aes entry in lpc vpath

2017-04-22T04:32:26+00:00

I added another entry instead of fixing the existing one. Not ideal. Signed-off-by: Keith Packard