mjb/altos/src/kernel, branch 1.4.9.1AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=1.4.9.12014-07-06T19:36:27+00:00Add support for the "kite" micropeak variant2014-07-06T19:36:27+00:00Keith Packardkeithp@keithp.com2014-07-06T19:35:13+00:00urn:sha1:d1527a5457210eb914312cf8857bfb88982a8462
This uses a 100m 'launch detect' altitude and logs data every 19.2s
instead of every .192s.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Rework packet receive for cc11202014-07-05T07:38:10+00:00Keith Packardkeithp@keithp.com2014-07-05T07:04:06+00:00urn:sha1:292cb8380b478542555b5f370e8252eafa2f74ac
Instead of blocking on PQT, just set up the receiver to start going
and when the first bit interrupt comes in, grab the SPI bus if
possible and configure it for reception. This improves sensitivity in
the radio by a significant amount while making the code conceptually a
bit nicer.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Call ao_telemetry_reset_interval when telemetry rate changes2014-07-05T07:38:09+00:00Keith Packardkeithp@keithp.com2014-07-05T07:09:25+00:00urn:sha1:ea5887027e7a39da2b7d84a142d74950b7a24703
This lets the radio code adjust the telemetry packet sending pattern
when the data rate changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Add config support for 2400 and 9600 baud telemetry rates2014-07-05T07:38:09+00:00Keith Packardkeithp@keithp.com2014-07-03T05:44:07+00:00urn:sha1:214a38eb2b084baec526aa42016eddb954038639
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Add defines for 2400 and 9600 baud telemetry rates2014-07-05T07:38:09+00:00Keith Packardkeithp@keithp.com2014-07-03T05:42:10+00:00urn:sha1:0605b5a1cdff5cfd71fc9ef3161a62d74a1124b4
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Reduce configuration data telemetry to once per 5 seconds2014-07-05T07:38:09+00:00Keith Packardkeithp@keithp.com2014-07-05T06:26:57+00:00urn:sha1:f8567a7be7ccd5dcc57ab65e63efe45e62008127
This data is constant, so we don't need to send it very often. Once
every five seconds should be plenty.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Use TeleMetrum v1.9 board for MegaDongle experiments2014-07-05T07:38:09+00:00Keith Packardkeithp@keithp.com2014-07-03T05:46:07+00:00urn:sha1:657d455a2fad36193e6b3a7037d9ba7f09ae1168
This configures the MegaDongle v0.1 directory to use the pin
assignments in TeleMetrum v1.9 boards.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: ao_rssi subsystem needs to use AO_LED_TYPE instead of uint8_t2014-07-05T07:38:09+00:00Keith Packardkeithp@keithp.com2014-07-03T05:42:43+00:00urn:sha1:500353ec83af0da7fce3d67f2707f4725b1f50ba
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Add optional debugging to print out pyro firing status2014-06-24T22:56:11+00:00Keith Packardkeithp@keithp.com2014-06-24T22:56:11+00:00urn:sha1:443bbb09468df7c1a10f2c76996c92380d8b8c23
This dumps pyro check failures for ao_flight_test so you can see why
pyro charges aren't firing.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Make APRS SSID configurable2014-06-23T04:05:05+00:00Keith Packardkeithp@keithp.com2014-06-23T04:05:05+00:00urn:sha1:3f3382126bf1122b1a78abe8458af5ec112a1f95
This uses the low-digit from the serial number by default, but lets
the user change it if desired.
Signed-off-by: Keith Packard <keithp@keithp.com>