mjb/altos/src/kernel/ao_report.c, branch tmarble-trng

altos: Make sure we don't beep out continuity twice in idle mode

2014-09-12T02:56:13+00:00

If the battery voltage report takes longer than the initialiation sequence, we could get to the state reporting after the state had switched from startup to idle. This would result in continuity being reported the first time through the loop. Then, as the state had already changed, we'd pass through the while test and go back to report continuity a second time. Fixed by using the state remembered before beeping out the voltage to decide whether to report the continuity. Signed-off-by: Keith Packard

altos: Report additional pyro channels via beeper

2014-08-15T02:08:19+00:00

Send a beep for each additional pyro channel, low for no igniter, mid for igniter. Does not change the reporting for the apogee/main channels. Signed-off-by: Keith Packard

altos: Switch beeping to farnsworth spacing

2014-04-13T00:46:34+00:00

Use 17wpm/12wpm farnsworth spacing for the state reports. Leave the numeric reports running slowly as those require counting. Signed-off-by: Keith Packard

altos: Report battery voltage instead of S at startup

2014-04-05T07:22:31+00:00

This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard

altos: Rename 'core' to 'kernel'

2014-04-05T07:22:29+00:00

core remains a bad name to use -- dirvish skips files (and directories, it seems) with that name. Signed-off-by: Keith Packard