mjb/altos/src/easymini-v0.1, branch telegps-v0.3

altos: Set default LPC stack to 512 bytes, Em to 384 bytes

2013-08-17T15:44:01+00:00

The default for lpc has been raised to 512 bytes, but Em doesn't have enough RAM for that. Signed-off-by: Keith Packard

altos/lpc: Add boot loader

2013-06-24T21:30:22+00:00

Support the USB boot loader, add USB pull-up support. Signed-off-by: Keith Packard

altos/lpc: Turn off more clocks, disable USART for easymini

2013-06-16T22:07:54+00:00

Try to reduce noise on the power supply. Signed-off-by: Keith Packard

Add Mini logging format. Use in EasyMini

2013-05-20T06:07:54+00:00

This is a 16-byte record that includes all of the sensor data in each sensor record, along with records for flight state changes. Signed-off-by: Keith Packard

altos/easymini: Initialize beep and ADC. Declare use of igniter bits.

2013-05-20T03:39:19+00:00

This makes easymini actually work! Signed-off-by: Keith Packard

altos/easymini: Use different pins for igniter outputs

2013-05-20T03:39:19+00:00

Was using the I2C outputs which are open drain, which makes it impossible to force them high as needed to driver our igniters. Signed-off-by: Keith Packard

altos/easymini: MS5607 chip select bits were defined wrong

2013-05-20T03:39:19+00:00

Signed-off-by: Keith Packard

altos/easymini: Easymini doesn't have USB connect or VBUS wiring

2013-05-20T03:39:19+00:00

Disable these in ao_pins.h Signed-off-by: Keith Packard

altos/lpc: Allow for alternate SPI SCLK0 pin usage

2013-05-20T03:39:19+00:00

SPI SCLK0 can appear on three different pins; let the application configure which one it wants. Signed-off-by: Keith Packard

altos: ignore built files in easymini-v0.1

2013-05-18T10:54:30+00:00

Signed-off-by: Keith Packard