mjb/altos/src/easymega-v1.0, branch debian/1.6.3-1

altos: Make sure AO_MMA655X_INVERT is declared where needed

2016-05-02T23:19:39+00:00

Add #define AO_MMA655X_INVERT 0 to existing products which didn't declare it at all. This will make sure the value is set correctly for each new board. Signed-off-by: Keith Packard

altos: Add HAS_COMPANION to new boards with companion connectors

2015-08-21T06:08:17+00:00

Thanks much to Rob Derstadt for discovering this bug! TeleMetrum v2.0, TeleMega, EasyMega, TeleBalloon v2.0 all have companion connectors and yet HAS_COMPANION was not defined. This disabled companion telemetry packets on these products, but otherwise didn't have any effect. Signed-off-by: Keith Packard

altos/easymega: Set USB PID for EasyMega to 0x0028

2014-09-09T16:09:22+00:00

It was using 0x0023, which is for TeleMega. 0x0028 is what's listed in usbvidpid.h. Signed-off-by: Keith Packard

change easymega from v0.1 to v1.0, tweak to build on master, add to Makefile

2014-08-15T00:16:14+00:00

lose the (old) easymega-v1.0 directory in favor of my fresher 0.1

2014-05-15T22:23:17+00:00

altos: Report battery voltage instead of S at startup

2014-04-05T07:22:31+00:00

This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard

Add easymega firmware

2014-03-17T01:12:33+00:00

A trimmed down TeleMega build with no radio or GPS, along with pin changes necessary for the device. Signed-off-by: Keith Packard