mjb/altos/src/drivers, branch telemegaAltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=telemega2013-05-16T04:36:29+00:00altos: Try a different carrier generation plan2013-05-16T04:36:29+00:00Keith Packardkeithp@keithp.com2013-05-16T04:36:29+00:00urn:sha1:267f9c5a43e9eb5d10d2bde5a05c368cfed96a54
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Crank up the test mode deviation to see if it's using it2013-05-16T04:23:30+00:00Keith Packardkeithp@keithp.com2013-05-16T04:23:30+00:00urn:sha1:83f0802f8b054f6fc3db9c26a51bd54711625c0e
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: More radio hacking to try and generate a pure carrier.2013-05-16T04:04:10+00:00Keith Packardkeithp@keithp.com2013-05-16T04:04:10+00:00urn:sha1:d685be9f9565fa5a5dd4c1bfe4738fc9d029b5e6
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: More attempts to get the carrier steady.2013-05-16T03:33:03+00:00Keith Packardkeithp@keithp.com2013-05-16T03:33:03+00:00urn:sha1:0f1ed2203d8887755b09c5fcadd094bc96ac4d71
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Use soft TX mode with 0 deviation to test the cc1120 TX2013-05-16T03:09:04+00:00Keith Packardkeithp@keithp.com2013-05-16T03:09:04+00:00urn:sha1:0b7cbb0aa3b317a8ff7ddf09476d5d4a1ae0d883
This should transmit a plain carrier
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Disable cc1120 preamble for RDF and APRS modes2013-05-15T22:43:05+00:00Keith Packardkeithp@keithp.com2013-05-15T22:43:05+00:00urn:sha1:6a6730c39b45b69dcebdcc6b412c7e5617ca8296
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Set cc1120 to RDF mode when testing radio to try and turn off modulation2013-05-15T22:32:59+00:00Keith Packardkeithp@keithp.com2013-05-15T22:32:59+00:00urn:sha1:e9868cd0194e3d5098ca2c4f3753a12c251cb47f
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Remove some MMA655x debugging printfs2013-05-15T05:19:07+00:00Keith Packardkeithp@keithp.com2013-05-15T05:19:07+00:00urn:sha1:4a147443e41fbedd2eb8e653abe974188b26a32b
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Mess around with MPU6000 init some more2013-05-15T05:12:09+00:00Keith Packardkeithp@keithp.com2013-05-15T05:12:09+00:00urn:sha1:cbbe024725a829c664599420f621064a3e7822c4
Try to get it to come up reliably
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: mpu6000 was getting spi mutex twice2013-05-15T04:55:59+00:00Keith Packardkeithp@keithp.com2013-05-15T04:55:59+00:00urn:sha1:fc4f86810a05abd03e6ab200585f3efc15b9ceeb
Need to use ao_spi_set_cs and ao_spi_clr_cs now that the mutex is held
out side
Signed-off-by: Keith Packard <keithp@keithp.com>