mjb/altos/src/drivers/ao_pad.c, branch debian/1.8.6-1AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=debian%2F1.8.6-12018-06-17T19:35:23+00:00altos/ao_pad: Move LED test to the monitor task2018-06-17T19:35:23+00:00Keith Packardkeithp@keithp.com2018-06-17T19:35:23+00:00urn:sha1:9ece56e3ad76af6ae623ad7a6782c0c933839be8
It sets the LEDs, so it's best to not start doing that until we've
tested them.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/ao_pad: Turn on all LEDs for a moment at power up2018-06-17T19:30:09+00:00Keith Packardkeithp@keithp.com2018-06-17T19:30:09+00:00urn:sha1:cef5a5725e3bf2c17965599bd76eb93cb05a0f80
Allow validation of all LED connections.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/ao_pad: Use AO_LED_TYPE for computing active LEDs.2018-06-17T19:29:36+00:00Keith Packardkeithp@keithp.com2018-06-17T19:29:36+00:00urn:sha1:731ba39a22719a8c431eb63895cd8ba553975114
instead of uint8_t
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/telefire*: Do voltage tests in decivolts instead of ADC units2018-06-01T05:39:45+00:00Keith Packardkeithp@keithp.com2018-06-01T05:39:45+00:00urn:sha1:99642f9c4f89aa5577376a9cd118e7cff26e2762
This requires that each pad device specify the ADC reference voltage
and all relevant voltage divider resistor values explicitly so that
the ADC values can be converted to decivolts and compared with one
another. This should be easier to understand in the future when
reading the code.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/drivers: Pads with multi-port firing and pad selector DIP switch2018-05-22T05:38:15+00:00Keith Packardkeithp@keithp.com2018-05-22T05:32:38+00:00urn:sha1:e272f6a66881b6904037ee7b1afeb9a8a3ec5b2a
TeleFire 8 scrambles GPIOs to make layout cleaner, placing the 8
firing outputs across two GPIO ports.
We're also adding an 8-unit selector for box number so that boards can
be re-configured in the field. These override any ROM-configuration
value; you can select the rom value by setting all switches to 'off'.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/ao_pad.c: Use #if HAS_LOG instead of #ifdef HAS_LOG2017-04-24T23:41:30+00:00Keith Packardkeithp@keithp.com2017-04-24T23:40:46+00:00urn:sha1:8e5b4359050701513a807131564ae54f2e6b919b
TeleFire v0.1 defines HAS_LOG to 0.
Signed-off-by: Keith Packard <keithp@keithp.com>
eliminate spurious close braces2017-04-23T05:02:53+00:00Bdale Garbeebdale@gag.com2017-04-23T05:02:53+00:00urn:sha1:6cfd9411026d536b5b75098b8c9ec3ceb3d945aaadd static test start and stop commands to radio protocol for telefiretwo2017-04-23T05:01:44+00:00Bdale Garbeebdale@gag.com2017-04-23T05:01:44+00:00urn:sha1:e3b30d4bd6faf68c885791fb87229558cc1157a6Switch from GPLv2 to GPLv2+2016-07-12T22:41:41+00:00Keith Packardkeithp@keithp.com2016-07-05T16:03:49+00:00urn:sha1:1085ec5d57e0ed5d132f2bbdac1a0b6a32c0ab4a
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Allow for pad boxes with different sensor configurations2016-04-20T03:21:30+00:00Keith Packardkeithp@keithp.com2015-12-22T05:47:10+00:00urn:sha1:93100ae8d4c8bd8fd6bdeff2cdc87b613c5d8058
This allows for a pad box without a resistor from power to each
FET. That resistor is needed to detect welded relays, but in a
solid-state system, that's not a possibility.
Signed-off-by: Keith Packard <keithp@keithp.com>