mjb/altos/src/drivers/ao_pad.c, branch altosdroid_v1.2-1AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=altosdroid_v1.2-12012-10-15T06:04:44+00:00altos/telefire: Report valid channels instead of valid pins2012-10-15T06:04:44+00:00Keith Packardkeithp@keithp.com2012-10-15T06:04:44+00:00urn:sha1:84c56b1e92fca181207c468ea6351db3c2f196fb
Now that pins don't match channels 1:1, make sure that the report back
to the LCO names the channels instead of the pin numbers.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/telefire: Add siren/strobe support2012-10-10T21:28:07+00:00Keith Packardkeithp@keithp.com2012-10-10T21:28:07+00:00urn:sha1:3f059f8878a79b3154a19b6803fbc367eda80dc9
This also involved hacking up the code to allow for non-zero offsets
for the pad firing and continuity pins.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/telefire: Make sure armed alarm goes off on time2012-10-07T01:25:15+00:00Keith Packardkeithp@keithp.com2012-10-07T01:25:15+00:00urn:sha1:d4b1dffeef3e9ea96e143f74782e4da7d116c0d4
Instead of turning the alarm off when a packet is received after the
deadline, just do it in the thread which is awake all of the time.
This prevents the alarm from sticking on when the LCO box is turned
off while the arming key is on.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/telefire: Add steady warble when the LCO arm switch is on2012-09-09T20:58:29+00:00Keith Packardkeithp@keithp.com2012-09-09T20:58:29+00:00urn:sha1:77775711d414227b3ed97859d1b21ab1c689a724
And make debugging a run-time option too.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Disable debug printfs and fix pad ignite time for telefire2012-08-30T21:14:57+00:00Keith Packardkeithp@keithp.com2012-08-30T21:14:57+00:00urn:sha1:72d44d14aefcb754b871835aec8d265771357212
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: fix ao_pad debug output for query command2012-08-29T18:22:02+00:00Keith Packardkeithp@keithp.com2012-08-29T18:22:02+00:00urn:sha1:1b6ed262460ee75fb5bb684d13d19c26c7ea750b
Igniter status is an array these days.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Track protocol changes to ao_pad debug messages2012-08-29T06:00:23+00:00Keith Packardkeithp@keithp.com2012-08-29T01:08:59+00:00urn:sha1:3fe5a70d9ac2114ee554813b1dbb3019a3e4aff7
Make the debug output build again.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Clean up radio APIs2012-08-27T20:47:16+00:00Keith Packardkeithp@keithp.com2012-08-27T20:47:16+00:00urn:sha1:0f3483f93137f41a61f3fcbe06afcaffb1b9e17b
Move api to ao_radio_cmac.h include file.
Expose ao_radio_test as standard API.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Make 'pad' driver useful with telefire v0.12012-08-26T16:47:05+00:00Keith Packardkeithp@keithp.com2012-08-26T16:47:05+00:00urn:sha1:1c9baa88d6cd931c66d453674322908eb267ba4c
This reports correct status bits over the radio and to the LEDs for
all four channels, and also makes the firing test command control all
four relays.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Get ao_pad.c working on telefire v0.12012-08-24T07:42:32+00:00Keith Packardkeithp@keithp.com2012-08-24T07:42:32+00:00urn:sha1:6581fa1641882198c870c2f7b1340794b9d47f29
Monitor all four channels, allow any channel to be fired.
Turn on power LED at startup time.
Signed-off-by: Keith Packard <keithp@keithp.com>