mjb/altos/src/drivers/ao_ms5607.c, branch debian/1.9-1

altos/drivers: Use stdbool in ao_ms5607.c

2018-10-13T15:33:49+00:00

We don't have TRUE and FALSE anymore (they were pdclib specific). Signed-off-by: Keith Packard

altos: Eliminate 'pin' field from GPIO functions

2018-10-13T15:23:25+00:00

This was used with the 8051 bit-addressing mode to provide single-instruction access to GPIO pins. Signed-off-by: Keith Packard

altos: Remove 8051 address space specifiers

2018-10-13T15:22:50+00:00

Signed-off-by: Keith Packard

altos: Remove *_TO_DATA macros

2018-10-13T15:22:50+00:00

Now that we don't support 8051, we don't need these Signed-off-by: Keith Packard

altos: sdcc doesn't have 'false' and 'true'.

2018-10-02T20:57:58+00:00

Use FALSE and TRUE in ms5607.c driver instead. Signed-off-by: Keith Packard

altos/drivers: Shrink ao_ms5607.c code to fit on micropeak still

2018-10-02T20:00:32+00:00

Use some code constructs that make the little AVR processor happier and save about 16 bytes of memory. Signed-off-by: Keith Packard

altos: Update sensor data atomically

2017-06-12T05:54:22+00:00

Read data into a temp variable, block interrupts, then update the published value. The bug is easy to see with the HMC5883 which has to byte-swap the output of the chip, and hence can occasionally get caught with the wrong byte order data. Signed-off-by: Keith Packard

altos/ms5607: Allow applications to not use the normal data ring and thread

2017-04-28T06:51:21+00:00

MicroPeak V2 has tasks, but doesn't want to use another thread just for the MS5607. Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altos/detherm: Add ms5607 to detherm

2016-04-13T13:19:28+00:00

Signed-off-by: Keith Packard