mjb/altos/src/drivers/ao_ms5607.c, branch debian/1.8.7-2

altos: sdcc doesn't have 'false' and 'true'.

2018-10-02T20:57:58+00:00

Use FALSE and TRUE in ms5607.c driver instead. Signed-off-by: Keith Packard

altos/drivers: Shrink ao_ms5607.c code to fit on micropeak still

2018-10-02T20:00:32+00:00

Use some code constructs that make the little AVR processor happier and save about 16 bytes of memory. Signed-off-by: Keith Packard

altos: Update sensor data atomically

2017-06-12T05:54:22+00:00

Read data into a temp variable, block interrupts, then update the published value. The bug is easy to see with the HMC5883 which has to byte-swap the output of the chip, and hence can occasionally get caught with the wrong byte order data. Signed-off-by: Keith Packard

altos/ms5607: Allow applications to not use the normal data ring and thread

2017-04-28T06:51:21+00:00

MicroPeak V2 has tasks, but doesn't want to use another thread just for the MS5607. Signed-off-by: Keith Packard

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altos/detherm: Add ms5607 to detherm

2016-04-13T13:19:28+00:00

Signed-off-by: Keith Packard

altos: Make MS5607 PROM a public variable

2014-05-26T04:11:23+00:00

This will let the fake flight code update it as necessary, without creating a new interface in ao_ms5607.c Signed-off-by: Keith Packard

altos: Check for MS5607 MISO low before sleeping

2013-08-27T01:47:27+00:00

If the MISO line goes low before we manage to configure the interrupts, we'll miss it entirely unless we check the pin explicitly. Signed-off-by: Keith Packard

altos: Use %ld and %lu for MS5607 debug output

2013-08-27T00:18:17+00:00

The value are 'long', so use the right printf format. Signed-off-by: Keith Packard

altos/teletiny-v2.0: Support multiple SPI busses on CC1111

2013-08-26T05:24:01+00:00

Needed for TeleMini v2.0 Signed-off-by: Keith Packard