mjb/altos/src/drivers/ao_ms5607.c, branch 1.6.0.4

altos: Make MS5607 PROM a public variable

2014-05-26T04:11:23+00:00

This will let the fake flight code update it as necessary, without creating a new interface in ao_ms5607.c Signed-off-by: Keith Packard

altos: Check for MS5607 MISO low before sleeping

2013-08-27T01:47:27+00:00

If the MISO line goes low before we manage to configure the interrupts, we'll miss it entirely unless we check the pin explicitly. Signed-off-by: Keith Packard

altos: Use %ld and %lu for MS5607 debug output

2013-08-27T00:18:17+00:00

The value are 'long', so use the right printf format. Signed-off-by: Keith Packard

altos/teletiny-v2.0: Support multiple SPI busses on CC1111

2013-08-26T05:24:01+00:00

Needed for TeleMini v2.0 Signed-off-by: Keith Packard

altos: Make TeleMini v2.0 fit

2013-08-26T05:24:01+00:00

Mash lots of storage locations and code around to shrink stuff down to size Signed-off-by: Keith Packard

Initial TeleMini bits

2013-08-26T05:24:00+00:00

Signed-off-by: Keith Packard

altos: Add EXTI_PIN_NOCONFIGURE to exti interface, use for MS5607

2013-05-20T03:04:29+00:00

This asks the EXTI code to not mess with the pin configuration so that the MS5607 driver can get interrupts on the MISO pin while still using it for SPI. Signed-off-by: Keith Packard

altos: Use ao_spi_get/put_bit in MS5607 driver

2013-05-20T02:57:23+00:00

Replace open-coded ao_spi_get/put and ao_gpio_set sequences Signed-off-by: Keith Packard

altos/micropeak: Run MS5607 at max resolution for micropeak

2012-10-31T04:31:27+00:00

We've got lots of time, so get the highest resolution baro data available. Signed-off-by: Keith Packard

altos: Switch drivers to ao_arch_block/release_interrupts

2012-10-25T18:25:42+00:00

Stop using cli/sei, which are avr-specific Signed-off-by: Keith Packard