mjb/altos/src/drivers/ao_cc115l.c, branch debian/1.8.7-2AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=debian%2F1.8.7-22017-04-04T22:59:56+00:00altos: Define CC115L spi speed in each product2017-04-04T22:59:56+00:00Keith Packardkeithp@keithp.com2017-04-04T22:59:56+00:00urn:sha1:920b70fd5f6b78461c7ebae6b1e6490a0e050bc2
Different SoCs have different SPI speeds available; have each product
specify the speed to use instead of trying to use 4Mhz everywhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Switch from GPLv2 to GPLv2+2016-07-12T22:41:41+00:00Keith Packardkeithp@keithp.com2016-07-05T16:03:49+00:00urn:sha1:1085ec5d57e0ed5d132f2bbdac1a0b6a32c0ab4a
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/cc1115l: Reduce trace buffer size2016-06-10T21:40:26+00:00Keith Packardkeithp@keithp.com2016-06-10T21:40:26+00:00urn:sha1:36a08dc89ece6e2a2f0f69e3b31da17d66ceb2e2
A 32-element trace buffer is all the larger we can fit in teledongle.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/drivers: Increase SPI speed of CC115L to 6MHz2015-02-07T09:05:03+00:00Keith Packardkeithp@keithp.com2015-02-07T09:05:03+00:00urn:sha1:4b52f67abd0f9ed6d8208556007d75e7ee735cf0
The datasheet says that the maximum for back-to-back data is 6.5MHz.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Document cc115l power measured at RF setting 0x03 as -31.75dBm2014-12-23T01:10:33+00:00Keith Packardkeithp@keithp.com2014-12-23T01:10:33+00:00urn:sha1:014dcc1f179237dc247fafa4a2cff91809260681
We built a custom TeleGPS load for radio sensitivity measurements with
the lowest documented power level setting (0x03), and measured the
power out at that value of -31.75dBm on the test board.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Stop attempting to ramp power on CC115L2014-11-07T00:00:06+00:00Keith Packardkeithp@keithp.com2014-11-07T00:00:06+00:00urn:sha1:80a0397dde2f787fb20fd2520b274b826c68ed5a
The PA register on the 115L isn't in any way monotonic, making the old
code broken. Just rempve it instead of fixing it; we don't ramp
anywhere else...
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Reduce deviation at 2400/9600 baud2014-09-07T03:39:37+00:00Keith Packardkeithp@keithp.com2014-09-07T03:39:37+00:00urn:sha1:f395bcaa620490954d4a42de9b4870bc12bedc91
There's no reason to use 20.5kHz deviation at 2400 and 9600 baud, and
if we get a better receiver, we'll want to use narrower deviation to
have less bandwidth sucking noise into the radio. The new values are
(nominally) 5.125kHz deviation for 9600 baud and 1.5kHz deviation for
2400 baud.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Add 2400 and 9600 baud telemetry support to cc115l driver2014-07-05T07:38:10+00:00Keith Packardkeithp@keithp.com2014-07-03T05:41:20+00:00urn:sha1:8935e29e5aa9c01cd00b275a35dd7b99c00980c3
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Allow cc115l driver to be built without radio power control2014-06-06T00:24:57+00:00Keith Packardkeithp@keithp.com2014-06-06T00:24:57+00:00urn:sha1:2db2b75f8847ca0066bb19771653a65c9098ae52
TeleGPS just wants full power, so remove the configuration option
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Fix cc115l debug build2014-05-21T08:43:12+00:00Keith Packardkeithp@keithp.com2014-05-21T08:35:33+00:00urn:sha1:8b488bdd0f5c91be7e5aae1c8f0193e713734b14
New compiler warning flags and moving to the nxp require a few minor
changes in the code to make it work.
Signed-off-by: Keith Packard <keithp@keithp.com>