mjb/altos/src/drivers/ao_cc1120.c, branch debian/1.1-1

altos: Add custom panic noise for self-test failures

2012-09-01T02:01:21+00:00

Make it easier to tell which component is failing self test Signed-off-by: Keith Packard

altos: Clean up radio APIs

2012-08-27T20:47:16+00:00

Move api to ao_radio_cmac.h include file. Expose ao_radio_test as standard API. Signed-off-by: Keith Packard

altos: Place STM config values at fixed addresses for re-use

2012-07-17T08:24:52+00:00

Just like cc1111, stick the serial number and radio calibration values at known fixed addresses so that when re-flashing the board, we can go find the existing values. Signed-off-by: Keith Packard

altos: Create macros to convert from/to radio RSSI representation

2012-07-11T20:50:56+00:00

AO_RSSI_FROM_RADIO and AO_RADIO_FROM_RSSI. Removes a bunch of open-coded versions of the same function. Signed-off-by: Keith Packard

altos: Signal continuity over radio in pad mode (trac #40)

2012-07-11T03:35:19+00:00

This is especially useful for telemini which has no beeper, allowing you to hear the continuity signal while at the pad over the air. Signed-off-by: Keith Packard

altos: Make profiling Viterbi decoder more useful

2012-06-28T02:47:52+00:00

This blocks starting the decoder until all of the data have arrived so that the time spent in the decoder is easily computed. Signed-off-by: Keith Packard

altos: Clean up radio CRC handling

2012-06-28T00:17:44+00:00

Make the FEC code just set the CRC_OK bit like the cc1111 radio does; eliminates a bunch of weird conventions across the FEC API. Signed-off-by: Keith Packard

altos: include targe SPI speed in get request

2012-06-27T21:34:53+00:00

STM needs it to be provided when enabling the SPI device, so just fix AVR and cc1111 to do the same. Signed-off-by: Keith Packard

altos: Clean up cc1120 driver a bit

2012-06-27T08:22:00+00:00

Make some variables static, remove stale debug code Signed-off-by: Keith Packard

altos: Optimize FEC encode and decode

2012-06-27T06:11:10+00:00

Integrate interleaving, CRC and padding within the decode/encode functions. Provide for ISR priorities so that the 1120 RX interrupt takes precedence over the other interrupts or we risk losing bits. Optimize the viterbi decoder a bit (goes from 10ms per packet to 7ms per packet). Signed-off-by: Keith Packard