mjb/altos/src/core/ao_telemetry.c, branch altosdroid_v1.2-1

altos: Add logging and telem to telegps

2013-03-30T08:33:49+00:00

This turns on telemetry, APRS, RDF and data logging for telegps. Data is logged as soon as GPS has a date to create the right filename, using files of the form YYYYMMDD.LOG which just barely fits in a FAT filename. Telemetry/RDF/APRS are all separately controllable. Signed-off-by: Keith Packard

altos: Make APRS interval configurable

2012-12-08T01:18:32+00:00

This provides a separate configuration value for APRS, allowing the interval between APRS reports to vary. Signed-off-by: Keith Packard

altos: Send APRS packets even during ascent

2012-12-06T18:30:46+00:00

If you're using APRS, presumably you want to watch the rocket going up too. Signed-off-by: Keith Packard

altos: Allow telemetry, rdf and APRS to be individually controlled

2012-12-06T18:28:14+00:00

But, only when APRS is available so that TeleMetrum and TeleMini don't change behaviour Signed-off-by: Keith Packard

altos: Hook up APRS to telemetry loop

2012-12-06T18:23:39+00:00

Send APRS packet once every 2 seconds Signed-off-by: Keith Packard

altos: Megametrum ADC values are 12 bits, discard low 4 for telemetry

2012-07-18T03:44:55+00:00

We've only got space for 8 bits for the ADC values for pyro channels, discard the low 4 bits instead of the low 8 bits. Signed-off-by: Keith Packard

altos: Signal continuity over radio in pad mode (trac #40)

2012-07-11T03:35:19+00:00

This is especially useful for telemini which has no beeper, allowing you to hear the continuity signal while at the pad over the air. Signed-off-by: Keith Packard

altos: Allow megametrum to be built without using the mag sensor

2012-06-28T06:03:33+00:00

I'm having trouble getting it working reliably, so we'll like disable it for now. This patch makes that possible. Signed-off-by: Keith Packard

altos: Make gcc happy with ao_telemetry_set_interval

2012-06-27T06:15:54+00:00

Using unsigned locals made GCC sad as it was compared with a signed value. Signed-off-by: Keith Packard

altos: Add full MM telemetry

2012-06-21T16:45:42+00:00

Create two new telemetry packets to hold all of the MM data. This patch also splits the telemetry structures out of ao.h Signed-off-by: Keith Packard