mjb/altos/src/core/ao_config.c, branch telemetrum-v2.0

altos: allow projects to override default config values

2013-08-17T15:36:35+00:00

Override default radio power and APRS interval Signed-off-by: Keith Packard

altos: Move MS5607 info from 'v' to 'c s'

2013-05-16T05:13:08+00:00

Makes more sense there. Signed-off-by: Keith Packard

altos: Add temporary RF power settings

2013-03-29T19:13:59+00:00

These expose the raw cc115l and rfpa0133 register settings so that we can calibrate them against measured power outputs. I've tested them to verify that they change how much power the board consumes, so they're clearly doing something... Signed-off-by: Keith Packard

altos: Fix config to not abort radio recv when no recv is available

2013-03-26T21:28:37+00:00

Use the new radio recv define to skip disabling the receiver when there isn't a receiver. Signed-off-by: Keith Packard

altos: Make APRS interval configurable

2012-12-08T01:18:32+00:00

This provides a separate configuration value for APRS, allowing the interval between APRS reports to vary. Signed-off-by: Keith Packard

Merge branch 'master' into aprs

2012-12-07T18:14:11+00:00

altos: Change 'flight-number' to 'current-flight'

2012-12-07T01:06:17+00:00

Avoids ambiguity with stored flight info, which starts lines with 'flight'. Signed-off-by: Keith Packard

altos: Allow telemetry, rdf and APRS to be individually controlled

2012-12-06T18:28:14+00:00

But, only when APRS is available so that TeleMetrum and TeleMini don't change behaviour Signed-off-by: Keith Packard

altos: Make Tm recovery mode set RF cal and callsign too

2012-11-18T17:50:54+00:00

This lets us connect to Tm even if someone messes up the RF calibration or callsign info Signed-off-by: Keith Packard

altos: Compute desired frequency when upgrading from pre-1.1

2012-10-09T04:59:55+00:00

Instead of just smashing the frequency to 434.550, compute the frequency from the old radio channel value Signed-off-by: Keith Packard