mjb/altos/src/core/ao.h, branch mm-ms5611

altos: include ao_arch_funcs.h at the very end of ao.h

2012-09-09T20:43:45+00:00

Move it below the definition of the ms5607 init function Signed-off-by: Keith Packard

altos: Add custom panic noise for self-test failures

2012-09-01T02:01:21+00:00

Make it easier to tell which component is failing self test Signed-off-by: Keith Packard

altos: Note changes to configured AES key for SPI radio convenience

2012-08-29T18:19:17+00:00

Keep a sequence number to mark when the AES key is changed so that the radio code can avoid sending the key before every CMAC radio operation. Signed-off-by: Keith Packard

altos: Clean up radio APIs

2012-08-27T20:47:16+00:00

Move api to ao_radio_cmac.h include file. Expose ao_radio_test as standard API. Signed-off-by: Keith Packard

altos: Add button driver and event queue

2012-08-07T05:53:52+00:00

With this, a single task can wait for any button or quadrature input device. Signed-off-by: Keith Packard

altos: Add telefire-v0.1

2012-07-30T02:47:42+00:00

Signed-off-by: Keith Packard

altos: Make ao_tick_count visible

2012-07-16T22:24:21+00:00

Necessary to fetch it when interrupts are already disabled as we can't call ao_time then. Signed-off-by: Keith Packard

altos: Add arbitrary pyro channel support

2012-07-14T08:26:38+00:00

Programmed by specifying a conjunction of flight conditions that trigger the igniter to fire. Signed-off-by: Keith Packard

altos: Create macros to convert from/to radio RSSI representation

2012-07-11T20:50:56+00:00

AO_RSSI_FROM_RADIO and AO_RADIO_FROM_RSSI. Removes a bunch of open-coded versions of the same function. Signed-off-by: Keith Packard

altos: Force 434.550Mhz by connecting debug gnd and clk (trac #41)

2012-07-11T05:41:59+00:00

Check for pin P2_2 low at startup and set the frequency to 434.550MHz. This value won't get written to flash, so rebooting again will restore the configured frequency. Signed-off-by: Keith Packard