mjb/altos/src/cc1111, branch split-library

altos: Set correct registers for serial0 baud

2012-01-04T06:27:59+00:00

oops. not going to work very well setting serial 1. Signed-off-by: Keith Packard

altos: Add support for UART0 in async mode

2012-01-04T04:41:15+00:00

And copy bytes from it to stdout. Signed-off-by: Keith Packard

altos: More _asm -> __asm changes

2011-12-30T23:42:28+00:00

Missed a few last time Signed-off-by: Keith Packard

altos: Clean up for SDCC 3.1 - more keywords

2011-12-30T23:38:32+00:00

_asm -> __asm sbit -> __sbit remove variables named 'data' Signed-off-by: Keith Packard

altos: SDCC 3.1 wants __at instead of at

2011-12-30T20:27:35+00:00

Older SDCC would accept __at, so just replace all occurances unconditionally. Signed-off-by: Keith Packard

altos: Create TeleMetrum v1.2 directory

2011-12-18T01:09:35+00:00

The hardware is software-compatible with v1.1, but it's nice to have the right version number in all of the files. Signed-off-by: Keith Packard

altos: Set default flight log max to 127k on TM v0.1

2011-11-13T02:47:08+00:00

The flash part on v0.1 boards is only 128kB. Signed-off-by: Keith Packard

altos: Handle internal and external telem monitoring requests

2011-11-13T02:44:36+00:00

Record separate internal vs external monitoring state, allowing both to happen at the same time, and when either is turned off, the other keeps working. This also adds disable/enable so that other radio users can temporarily take over the radio; monitoring will resume when the other radio user is finished. Signed-off-by: Keith Packard

altos: Set SPI fill value each time it is used.

2011-11-13T02:36:11+00:00

This ensures that the final MOSI pin value will be high after a receive is finished. Signed-off-by: Keith Packard

altos: Initialize DMA config address at boot time

2011-11-13T02:31:46+00:00

Instead of resetting these each time a transfer is started, just set them once at boot time. Signed-off-by: Keith Packard