mjb/altos/src/cc1111, branch new-stateAltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=new-state2013-10-08T16:22:03+00:00Add --with parameters to configure for compiler selection2013-10-08T16:22:03+00:00Keith Packardkeithp@keithp.com2013-10-08T16:22:03+00:00urn:sha1:6a1e398e590121458176758858bb4210f3eb5a55
This allows the user to specify which compiler to use for each target
CPU. Also checks to make sure the arm compiler supports -m0 and -m3
cpu type flags. The build now actually uses the specified compilers too.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Don't use ao_data on cc1111 projects2013-08-27T01:47:27+00:00Keith Packardkeithp@keithp.com2013-08-27T01:46:02+00:00urn:sha1:a73b02518fcbc9fc0807ed8e141d3a06e8ad8214
cc1111 ao_adc.c supplies the needed globals at this point, and linking
both into the program leads to two different versions of each at
different addresses (yay SDCC linker!)
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Check for MS5607 MISO low before sleeping2013-08-27T01:47:27+00:00Keith Packardkeithp@keithp.com2013-08-27T01:43:20+00:00urn:sha1:7e941695aa27e5eaf453ca1128b8d835472410a4
If the MISO line goes low before we manage to configure the
interrupts, we'll miss it entirely unless we check the pin explicitly.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/cc1111: Wake up non-ADC sensor code each timer tick2013-08-27T00:17:47+00:00Keith Packardkeithp@keithp.com2013-08-27T00:17:47+00:00urn:sha1:4e3955a5b0ac125bd807920c467f959618449fbc
Make sure the MS5607 code gets told to sample every tick
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/cc1111: Leave pin interrupts completely disabled at init time2013-08-27T00:16:54+00:00Keith Packardkeithp@keithp.com2013-08-27T00:16:54+00:00urn:sha1:3b2f83a7d686b5fbc0aaa56d48cb734f353631c8
Don't even turn in the PICTL bits as that seems to cause the chip to
be unhappy.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Get telemini to copy current MS5607 state to ring.2013-08-27T00:15:55+00:00Keith Packardkeithp@keithp.com2013-08-27T00:15:55+00:00urn:sha1:8ca98dc8c868c47c372d6b666c36e691fa402824
The ADC code is responsible for actually inserting the non-ADC data
into the ring, so do the copy there.
Signed-off-by: Keith Packard <keithp@keithp.com>
cc1111: Hacky pin interrupt support. Only useful for TeleMini v22013-08-26T23:42:45+00:00Keith Packardkeithp@keithp.com2013-08-26T23:42:45+00:00urn:sha1:af9f9cf0c21630562c74fae41773319229bf44d3
This code is designed to support the MS5607 MISO interrupt bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
cc1111: Rework ADC configuration a bit, fix Tm V2 ADC usage2013-08-26T23:41:33+00:00Keith Packardkeithp@keithp.com2013-08-26T23:41:33+00:00urn:sha1:2380a4b9bd69629c78eec0a87ff8681a0524d8d2
The Tm v2 ADC code was not actually fetching and storing the ADC
conversion values.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/teletiny-v2.0: Support multiple SPI busses on CC11112013-08-26T05:24:01+00:00Keith Packardkeithp@keithp.com2013-06-12T07:43:31+00:00urn:sha1:312f6194a4bc75473cb0d61a6d58b66fb1f7c068
Needed for TeleMini v2.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Initial TeleMini bits2013-08-26T05:24:00+00:00Keith Packardkeithp@keithp.com2013-05-22T20:03:06+00:00urn:sha1:d0b4e926ecececa7499a301b6135189be119512e
Signed-off-by: Keith Packard <keithp@keithp.com>