mjb/altos/src/cc1111, branch 1.3.2.2

altos/cc1111: Add support for CPU-driven USB pullup

2014-05-15T15:27:34+00:00

Signed-off-by: Keith Packard

altos/cc1111: Errata fix isn't needed for discontinued products

2014-05-14T05:46:19+00:00

And, doesn't fit in memory for some of them, so don't compile it. Signed-off-by: Keith Packard

altos/cc1111: Wait for xtal to be stable

2014-05-14T00:30:47+00:00

Errata http://www.ti.com/lit/er/swrz022c/swrz022c.pdf says that the xtal is stable bit is bogus and that you need to just delay for a while. Signed-off-by: Keith Packard

altos: Add configurable beep tone

2014-05-02T20:52:45+00:00

This lets you directly set the mid-range beep tone; the high and low tones remain set off of that in the same ratio as before. Note that none of the cc1111 products get this feature as they don't have enough flash space anymore... Signed-off-by: Keith Packard

altos: Report battery voltage instead of S at startup

2014-04-05T07:22:31+00:00

This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard

altos: Rename 'core' to 'kernel'

2014-04-05T07:22:29+00:00

core remains a bad name to use -- dirvish skips files (and directories, it seems) with that name. Signed-off-by: Keith Packard

altos: Expose ao_usb_running globally

2014-02-18T17:44:52+00:00

This lets other bits of the code know when USB has been connected. Signed-off-by: Keith Packard

altos: Oops. Was only filling out part of the TeleMetrum ADC record

2013-12-09T05:08:36+00:00

Because it's missing a return, we'd end up filling out one element of the ADC record per interrupt, and rotating through which one was set, hitting all of the even offsets within the struct. Yikes! Signed-off-by: Keith Packard

src/cc1111: Turn off RC osc after xtal is running

2013-12-07T17:38:50+00:00

There's no reason to keep running the RC oscillator after we switch to the crystal, so turn it off. Signed-off-by: Keith Packard

Add --with parameters to configure for compiler selection

2013-10-08T16:22:03+00:00

This allows the user to specify which compiler to use for each target CPU. Also checks to make sure the arm compiler supports -m0 and -m3 cpu type flags. The build now actually uses the specified compilers too. Signed-off-by: Keith Packard