mjb/altos/src/cc1111/ao_serial.c, branch 1.6.5

altos/cc1111: Use SW to drive UART RTS pin

2016-05-09T18:33:48+00:00

Can't get the hw to work. Signed-off-by: Keith Packard

altos: Do not release interrupts from any pollchar function

2013-03-31T19:24:24+00:00

getchar relies on interrupts being blocked across the pollchar calls and into the sleep call or it may go to sleep with data pending. This prefixes all pollchar functions with _ to indicate that they are to be called with interrupts blocked and eliminates all interrupt manipulation calls from within the pollchar functions. Signed-off-by: Keith Packard

altos: Add support for 115200 baud serial rates

2012-12-01T00:03:45+00:00

Necessary for flashing skytraq chips Signed-off-by: Keith Packard

altos: Make stdio 8-bit clean by making pollchar return int

2012-12-01T00:01:07+00:00

We were stealing one value (0xff) in the return value from pollchar to indicate 'not ready yet'. Instead of doing that, use the integer value -1 and have pollchar return an int instead of a char. That necessitated cleaning a few other bits to make sure that 0xff wouldn't get promoted to -1 on accident. Signed-off-by: Keith Packard

altos: Oops. Serial 1 stdin was busted by typo

2012-08-07T18:30:47+00:00

A typo in the symbol used to enable stdin wakeups from serial1 caused the input to pend until some other wakeup occurred. This also makes the serial1 hw flow control pin selects in config 2 work right, although those aren't used by any current product Signed-off-by: Keith Packard

src/cc1111: Allow serial0 without serial1

2012-08-05T19:16:25+00:00

The ao_serial_speed structure is needed by serial0 too. Signed-off-by: Keith Packard

altos/cc1111: Fix serial 0 option 2 pins definitions

2012-07-30T02:36:50+00:00

tx/rx are 4/5, rts/cts are 2/3 Signed-off-by: Keith Packard

altos: Massive product config cleanup

2012-04-14T21:04:29+00:00

Support multiple serial ports more cleanly Split out parts of ao.h into separate feature header files Signed-off-by: Keith Packard

altos: Add support for UART0 in async mode

2012-01-04T04:41:15+00:00

And copy bytes from it to stdout. Signed-off-by: Keith Packard

altos: Restructure altos build to prepare for multi-arch support

2011-08-26T03:49:11+00:00

Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard