mjb/altos/src/cc1111/ao_radio.c, branch debian/1.4-1

altos/cc1111: Fetch RSSI for TeleFire from correct byte

2013-06-20T05:42:58+00:00

Reading the status byte doesn't provide very useful RSSI info Signed-off-by: Keith Packard

altos: Open up the DVGA gain to use all of the available settings

2013-05-08T03:08:00+00:00

We usually work in RF quiet areas; let the AGC hardware try all of the available gain settings. Signed-off-by: Keith Packard

altos: Compute "real" RSSI value in radio code as needed

2013-05-08T03:07:54+00:00

Instead of dragging around the weird CC1111 RSSI values, just compute a dBm value in a signed 8-bit integer, ao_radio_rssi. Use that everywhere we need RSSI internally. We leave the weird CC1111 value in the packet reply as that's what the host expects. Signed-off-by: Keith Packard

altos: Provide timeout value to ao_radio_recv

2013-05-08T03:07:52+00:00

Instead of using ao_alarm around calls to ao_radio_recv, provide an explicit timeout value as needed by radio functions with more complicated system interaction than the cc1111. The timeout is 8 bits of clock ticks. Signed-off-by: Keith Packard

altos: Clean up radio APIs

2012-08-27T20:47:16+00:00

Move api to ao_radio_cmac.h include file. Expose ao_radio_test as standard API. Signed-off-by: Keith Packard

altos: Disable telefire 'pad' listener when testing radio

2012-08-24T07:27:13+00:00

Ensures that the radio testing won't block waiting for a firing mode packet to arrive. Signed-off-by: Keith Packard

altos: Signal continuity over radio in pad mode (trac #40)

2012-07-11T03:35:19+00:00

This is especially useful for telemini which has no beeper, allowing you to hear the continuity signal while at the pad over the air. Signed-off-by: Keith Packard

altos: Make cc1111 radio control functions static

2012-06-27T06:05:42+00:00

No need to publish these; they're all private to cc1111 Signed-off-by: Keith Packard

altos: Start adding apogee lockout support

2012-04-14T21:04:29+00:00

Remove radio channel support too. Signed-off-by: Keith Packard

altos: Handle internal and external telem monitoring requests

2011-11-13T02:44:36+00:00

Record separate internal vs external monitoring state, allowing both to happen at the same time, and when either is turned off, the other keeps working. This also adds disable/enable so that other radio users can temporarily take over the radio; monitoring will resume when the other radio user is finished. Signed-off-by: Keith Packard