mjb/altos/src/cc1111/ao_adc.c, branch pong

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altos: Oops. Was only filling out part of the TeleMetrum ADC record

2013-12-09T05:08:36+00:00

Because it's missing a return, we'd end up filling out one element of the ADC record per interrupt, and rotating through which one was set, hitting all of the even offsets within the struct. Yikes! Signed-off-by: Keith Packard

altos: Don't use ao_data on cc1111 projects

2013-08-27T01:47:27+00:00

cc1111 ao_adc.c supplies the needed globals at this point, and linking both into the program leads to two different versions of each at different addresses (yay SDCC linker!) Signed-off-by: Keith Packard

altos: Get telemini to copy current MS5607 state to ring.

2013-08-27T00:15:55+00:00

The ADC code is responsible for actually inserting the non-ADC data into the ring, so do the copy there. Signed-off-by: Keith Packard

cc1111: Rework ADC configuration a bit, fix Tm V2 ADC usage

2013-08-26T23:41:33+00:00

The Tm v2 ADC code was not actually fetching and storing the ADC conversion values. Signed-off-by: Keith Packard

Initial TeleMini bits

2013-08-26T05:24:00+00:00

Signed-off-by: Keith Packard

altos: Add telefire v0.2 support

2013-06-09T17:00:54+00:00

Signed-off-by: Keith Packard

altos: Monitor battery voltage on telebt

2013-04-09T07:30:36+00:00

Signed-off-by: Keith Packard

altos: Make TeleBalloon v1.1 build again

2012-11-30T04:38:37+00:00

This is untested, but at least it builds now Signed-off-by: Keith Packard

altos/telefire: Add siren/strobe support

2012-10-10T21:28:07+00:00

This also involved hacking up the code to allow for non-zero offsets for the pad firing and continuity pins. Signed-off-by: Keith Packard